Will the engine clear the core support when removing?

Abloch · Post by **Abloch** » Fri May 01, 2015 9:39 pm

To those of you who have pulled their engine, will it clear the core support without having to pull the front tires and lower the front end?

'68 D200 318ci using standard engine lift (cherry picker) and intake manifold/carb mounting plate.

Thanks, Andrew

JimE · Post by **JimE** » Fri May 01, 2015 10:40 pm

Jims68 · Post by **Jims68** » Sat May 02, 2015 6:08 am

Of course, you'll want to remove the radiator to keep from maybe bumping it, and also the fan which sticks out pretty far

. Here I am pulling the engine out of my 70 parts truck. I used this 318 in my '68. OH.... and I didn't even remove the hood!

slick · Post by **slick** » Sat May 02, 2015 7:42 pm

Just a word of advice from the guy (me) who has made many mistakes working on vehicles. When I did the motor swap in my crewcab I had a small issue. I couldn't pull my truck in all the way and have enough room to move both motors around etc... Well, my truck was parked where my garage door rolls up and I couldn't open the hood all the way up

I had a hell of a time getting the right angle on the motor to sneak it in there. Maybe do a dry run of the hood and surroundings first just to make sure

dodgeboykim · Post by **dodgeboykim** » Sat May 02, 2015 8:53 pm

W and D series 100 to 300 are easy to change motor. But when I did my D 500 the tires would not flatten out enough to get motor up and over the rad support. That was a fight with my engine hoist. Did it , But it was a pain.

Abloch · Post by **Abloch** » Sat May 02, 2015 8:56 pm

Thanks guys! Now I just need to get those pesky exhaust manifold to flange bolts undone.

Abloch · Post by **Abloch** » Tue May 05, 2015 5:12 pm

Yessssss.

Post by **Hobcobble** » Tue May 05, 2015 6:50 pm

John

coelcanth · Post by **coelcanth** » Tue May 05, 2015 10:55 pm

712edf · Post by **712edf** » Wed May 06, 2015 4:48 am

Nothing like pulling a motor in the church parking lot.

Bucky

coelcanth · Post by **coelcanth** » Wed May 06, 2015 9:37 am

that's not the parking lot, that's the middle of a Brooklyn city street !

you can just barely see the Chrysler building in the background, watching over us...

Abloch · Post by **Abloch** » Wed May 06, 2015 3:13 pm

Most excellent!

Txas2step · Post by **Txas2step** » Wed May 06, 2015 4:41 pm

coelcanth wrote:

Divine exorcism.

Jims68 · Post by **Jims68** » Thu May 07, 2015 6:56 am

I think I "get it" now.... the church is across the street!

Sweptline.ORG

Will the engine clear the core support when removing?

Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?

Re: Will the engine clear the core support when removing?