Door locks on a 64 d200

[Hemicss]

I need some pics or an explanation on how to connect the door lock to the door handle and or latch. I don't have any rods, but can make them, just don't know how they are supposed to go. Thanks!

[Hemicss]

Nothing, hmmmm!!

[Txas2step]

Do you have the lock cylinder swivel brackets that attach to the door with (2) Philips head screws?

[Hemicss]

I don't know what that/those are.

[Txas2step]

hope this helps.

[Hemicss]

Thanks for the pics....And I'm missing all those components, gonna have to hit junkyard.
Thanks fellas, I appreciate your help!!

[BigG]

I have pictures of this from a door I cut open, fairly simple, just make sure you get ALL the stuff. Lock cylinder lhas a slide clip, asst. screws, etc. Lock cyls. can be rekeyed to the same key if they match. If you don't find the parts , call me at 209-712-1186, I may have them, or also email pictures if needed . BigG

[Hemicss]

Well, I got into the doors today and found that everything was there minus the door locks. I got a set for an early b body and made a stud...as another member did here on the forum, and bingo, I'm in business. So I thank all of you guys for the help/info as it was a big help.

[Hemicss]

I guess I spoke too soon. The pass. side lock broke, so now I'm on the hunt for another set.