Big block engine mount pic?

[wayneswirld2]

Seems the mounts I removed from the boneyard truck, that had a 400 in it, won't bolt up to my 1962 413. I'm unsure of the year of the 400 that was in the donor, but I thought that all the big block mounts were the same. Anyone have a pic of the big block mounts?

Wayne
Austin, TX

[chilort]

P1220376 by chilort, on Flickr

[Hobcobble]

Here is a BB mount bracket on a '61-early '65
style insulator.
John

[chilort]

Yeah, see John's picture. I wasn't thinking about the year difference. Mine is of '68.

[wayneswirld2]

Looks like I have the wrong ones then. Couple of things about mine, the bottom hole doesn't line up, and it looks as though mine would bring the block further forward about 1/2" or so. Dunno if that half inch would really matter, but the bottom hole not lining up would be a problem with a stout motor in the truck.

Anyone have big block mounts for sale?

Wayne
Austin, TX

[digdoug]

http://store.440source.com/Engine-Suppo ... /119-1001/

[chilort]

My engine/trans combo seems to sit forward related to my trans mount but not to the engine mounts. I've still never figured out exactly what is going on. I need to sort that out soon.

[wayneswirld2]

The ones listed at the 440source site certainly are cheap enough, aren't they? Looks like I'll be askin' Slanta Clause for a pair...

Wayno
Austin, TX

[Ruiner]

Can someone please give me the height from base of the upper bracket to the holes for the engine bolts?...I can figure out the rest for myself :)...thanks...