np 435 differences
- moparman336
- Sweptline.ORG Member
- Posts: 173
- Joined: Sat Oct 20, 2007 11:00 pm
- City: canada
- State: Foreign
- Location: saskatchewan, canada
np 435 differences
my smallblock W200 has a 1967 model np435 with hydraulic clutch and 10 spline input shaft. the yoke is all rounded out as a result of lose u-joint straps. would anyone happen to know if a yoke off any other 435 would work. my buddy has a 1968 model 435 on his slant six powered W100, would this work? are these two trannies completely interchangeable?
67 D300 fargo 318 4 speed
68 W200 fargo 360 4 speed 38.5" boggers
68 W200 crewcab 360 4 speed 42" tsl's
70 D100 Dude /6 4 speed
68 W200 fargo 360 4 speed 38.5" boggers
68 W200 crewcab 360 4 speed 42" tsl's
70 D100 Dude /6 4 speed
Re: np 435 differences
I was able to swap yokes between two (1" 10-spline input shaft) Dodge NP435's with no issue.
Thanks,
Will
1946 Dodge Power Wagon http://powerwagon.wawii.com/46.html
1949 Dodge Power Wagon http://powerwagon.wawii.com/49.html
1953 Dodge M37 http://m37.wawii.com/
1964 Dodge W500 Fire Truck http://powerwagon.wawii.com/W500.htm
2006 Dodge 3500 Mega Cab http://wawii.com/My3500Megacab/index.htm
Will
1946 Dodge Power Wagon http://powerwagon.wawii.com/46.html
1949 Dodge Power Wagon http://powerwagon.wawii.com/49.html
1953 Dodge M37 http://m37.wawii.com/
1964 Dodge W500 Fire Truck http://powerwagon.wawii.com/W500.htm
2006 Dodge 3500 Mega Cab http://wawii.com/My3500Megacab/index.htm
Re: np 435 differences
The yoke from the '68 W100 will work on your '67 W200moparman336 wrote:my smallblock W200 has a 1967 model np435 with hydraulic clutch and 10 spline input shaft. the yoke is all rounded out as a result of lose u-joint straps. would anyone happen to know if a yoke off any other 435 would work. my buddy has a 1968 model 435 on his slant six powered W100, would this work? are these two trannies completely interchangeable?
![Thumbs UP :Thumbsup](./images/smilies/icon_thumright.gif)
The entire tranny will swap over too, if that's your plan.
John