Jim Megee's DODGE SWEPTLINE RESTORATION CD!!

Jims68 · Post by **Jims68** » Sun Dec 05, 2004 9:31 am

I am selling a "Dodge Truck Restoration CD" (No longer offered as a CD, but a digital download). This, is not a Factory Service Manual, but more of a restoration "guide". The download is over 600 MEGS of information. This digital download has a lot of information on it pertaining to the Dodge Sweptline Trucks. It has over 800 pictures of "How I did my restoration". These include photos of rust repair, body work, welding panels, etc. It is for all Sweptline enthusiasts. If your truck is restored, a beater, or a project in progress, then you may want to consider this option. Here are a couple of "Testimonies": (Names withheld)

1. Got my CD yesterday (Nov. 19) and it's great. It's like starting on a good book, I got started looking at the pics and couldn't stop until I had seen almost all of them. If you are working on a Sweptline you want this cd. Jim, I'm not sure how you had time to take that many pictures and still get the truck done.

2. Hi Jim,
I received your CD yesterday and read through it last night. I have to say that you did a great job with it. It is well written and is a great tool for somebody contemplating repairs like this.

3. What a cool CD, first, if you haven't ordered one, and consider yourself a sweptline enthusiast, you better get one. i have spent 2 nights, and about 3.5 hours on it, and so far, haven't seen everything on the cd. if you ever wondered, "whats behind that panel?" jims cd will show you. seems like the man cut everyone of them off at one time or another i didn't need the help on my truck this cd could provide someone. i ordered it just to support his project, and cause i wanted it. no regrets here at all this is one of those "must haves" for any Sweptline fan. really makes you appreciate the work that goes into some of these trucks.

These are just a few of the ones I saved. No personal information is shared with anyone! SEE BELOW FOR SHIPPING INFORMATION. For USA Residents, I accept checks, Money Orders, and PayPal. Foreign orders are Paypal ONLY.

For any questions or more testimonies, contact me at:

CONTACT: jmegee57@hotmail.com

===================

IF you don't get a response from me, it may be I'm away from the computer, OR your email is invalid. I have tried to get a response from someone with an iCloud email address, but it keeps coming back as the mailbox is FULL. PLEASE make sure you have room for emails. Contact me HERE with a PM. Clear out your mailbox. I am not ignoring you if you don't hear from me... so there must be an issue/problem somewhere.

Thanks!

SWEPTLINE Restoration CD ORDER INFO

**DIGITAL DOWNLOAD of the Sweptline CD. Exact same information as the original hard copy. Burn your own disc.
$20 Digital Download

I am no longer selling the "Hard Copy CD". Everyone seems to want the Digital Download now anyway. Besides... the Download version NOW has more info on it than the CD can fit.

Foreign Orders - $20 DIGITAL DOWNLOAD ONLY (PayPal ONLY in US DOLLARS)

James Megee
1483 Perkins Lane
Edgewater Park NJ 08010

Paypal to: jmegee57@hotmail.com

===================

Hoss · Post by **Hoss** » Sun Jan 02, 2005 12:36 pm

Been looking at your CD for about a week now and am just amazed at the information it contains. Will definately make a differance on the restoration of my 68 W300. Well worth the money.
Thanks,
Ken

Post by **Goldie** » Mon Mar 21, 2005 3:54 pm

It is obvious Jim is a skilled craftsman, but even I enjoyed just seeing it done the right way and I can't even put a fender on straight...Goldie

Toms66D100 · Post by **Toms66D100** » Wed Dec 14, 2005 1:09 pm

Got the CD on Monday. Just pulled myself away from it long enough to go to work and post this message. I have not done much sheet metal work and Jim has detailed the tools used in his restoration as well as some tips when restoring your own. This CD is money well spent. Thanks Jim.

dashshifter · Post by **dashshifter** » Wed Mar 08, 2006 9:01 pm

Are you still selling these cd's? I want one.
Steve

Jims68 · Post by **Jims68** » Thu Mar 09, 2006 7:25 am

Yes, I still sell them.

They are still only $20 which includes mailing to anywhere in the US. I accept Paypal, Money orders and Personal checks!

Welcome to the Sweptline.org too!

Jim

See the mailing address above if you want to mail check. Use my email address for Paypal.

DaveRoss · Post by **DaveRoss** » Thu Mar 09, 2006 8:54 am

Cha-ching.

Jim, you've got mail!

Jims68 · Post by **Jims68** » Thu Mar 09, 2006 9:07 am

Thanks Dave, I got the $$ so, I am sending it out to you in todays mail!

Jim

70-D100 · Post by **70-D100** » Thu Mar 09, 2006 2:33 pm

I just orderd mine.

Looking forward to seeing all the great info.

Jims68 · Post by **Jims68** » Thu Mar 09, 2006 7:08 pm

Brett, Got your Paypal THANKS! Post office is closed now, so I will get it out to you in tomorrows mail. Thanks again.

Jim

DaveRoss · Post by **DaveRoss** » Tue Mar 14, 2006 7:50 am

I received my CD yesterday.

Oh my Gosh!

Over 600 MB of before and after pictures

, some short videos (the music playing showing you driving back and forth in the finished product was priceless! *honk* *honk*), commentary, detailed instructions, notes and diagrams.

There's even some good HUMOR thrown in for good measure!

I would have to say this may prove to be the best $20 I've invested in my truck.

Thanks Jim.

Folks, if you want some real insight into restoration of your sweptline (or just want to fix a few things), get your $20 to Jim ASAP. You won't regret it.

70-D100 · Post by **70-D100** » Tue Mar 14, 2006 9:07 am

Mine came in yesterday. I was up most of the night looking at it. Looks like it's gonna be a real help for me. Great work!!

Jims68 · Post by **Jims68** » Tue Mar 14, 2006 11:29 am

I am glad you guys are enjoying it! Don't blame me for any loss of sleep

Thanks again, if I can help, just email me anytime.

Jim

Tufftruck · Post by **Tufftruck** » Thu Mar 23, 2006 12:09 am

Jim:
I received the CD today and it's great. It really answered a lot of questions that I had about the body work. The CD will be a great help while I'm restoring my 70 sweptline. You did a great job.

Hemikuda71 · Post by **Hemikuda71** » Sun Mar 26, 2006 9:24 am

OH MY GAWD!

Yes mine was in the mail yesterday.

I started doing more yesterday as I haven't been to active because of my knee operation. I came home dog tired and covered in grease and dirt (yes I over did it!). I found Jims CD in the mail and I rushed to the shower and cleaned up. As tired as I was I should have went to bed but I popped the CD in at 8:00 pm. I turned off the computor at 1:37 am!

Thanks Jim! That was the best sleep depervation I've had in a long time.

Hemikuda71 · Post by **Hemikuda71** » Sun Mar 26, 2006 11:03 am

Ok Jim, your in a DODGE, we've got "Dukes of Hazzard" music and we don't see any power slides or creek jumps, what gives? JK. LOL!

Yes I'm looking at it again! Thanks Jim for such a great CD!

Jims68 · Post by **Jims68** » Sun Mar 26, 2006 12:39 pm

This really makes me feel glad I put this CD together. Thanks alot for the compliments. I really do appreciate them.

Hemikuda71 wrote:OH MY GAWD!

Yes mine was in the mail yesterday.

I started doing more yesterday as I haven't been to active because of my knee operation. I came home dog tired and covered in grease and dirt (yes I over did it!). I found Jims CD in the mail and I rushed to the shower and cleaned up. As tired as I was I should have went to bed but I popped the CD in at 8:00 pm. I turned off the computor at 1:37 am!

Thanks Jim! That was the best sleep depervation I've had in a long time.

And to think... that type of sleep deprivation is legal in all 50 states!

Jim

DaveRoss · Post by **DaveRoss** » Thu Jul 13, 2006 9:28 am

This deserves a bump today.

mopardwh · Post by **mopardwh** » Mon Aug 28, 2006 12:45 pm

Check is in the mail.

Jims68 · Post by **Jims68** » Mon Aug 28, 2006 1:12 pm

Thanks Doug, I will let you know as soon as I get it. It should be a big help to you with your floor and rockers. When I did my truck, I wasn't planning on a resto... just a "fix 'er up" and well... as you will see in the CD, it did not turn out that way.

Jim