Hello, looking for ideas on which headers will fit my 71 Utiline. I swapped out the front end for the QA1 IFS, engine is 400 ci. I tried the hedman headers # 79250 long tubes but it hit the steering knuckle off the rack and pinion.
Any ideas on headers that will fit ?
any help appreciated,
thanks, Karl
which headers fit ??
-
- Sweptline.ORG Member
- Posts: 10
- Joined: Sun Mar 04, 2018 7:57 pm
- City: Hummelstown
- State: PA
Re: which headers fit ??
Probably expensive but might have to have some made.
Re: which headers fit ??
Maybe there are some shorty style BB headers out there?Blizzard523kf wrote: ↑Mon Oct 24, 2022 8:12 pmHello, looking for ideas on which headers will fit my 71 Utiline. I swapped out the front end for the QA1 IFS, engine is 400 ci. I tried the hedman headers # 79250 long tubes but it hit the steering knuckle off the rack and pinion.
Any ideas on headers that will fit ?
any help appreciated,
thanks, Karl
John
-
- Sweptline.ORG Pioneer
- Posts: 4047
- Joined: Fri Feb 15, 2008 8:46 pm
- City: Wichita Falls
- State: TX
- Location: wichita falls,texas
Re: which headers fit ??
I once had a set of Sanderson Block Huggers on my 440. It was in a Desoto Fireflite at the time. Not sure if they are still being made.
Bucky
Bucky
1966 W500
1975 W600
1978 W200 club cab
1975 W600
1978 W200 club cab
-
- Sweptline.ORG Member
- Posts: 458
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: which headers fit ??
Have you asked QA1 to see if that have a recommendation?Blizzard523kf wrote: ↑Mon Oct 24, 2022 8:12 pmHello, looking for ideas on which headers will fit my 71 Utiline. I swapped out the front end for the QA1 IFS, engine is 400 ci. I tried the hedman headers # 79250 long tubes but it hit the steering knuckle off the rack and pinion.
Any ideas on headers that will fit ?
any help appreciated,
thanks, Karl
It may be a long shot with a mopar engine but it’s worth a try.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
-
- Sweptline.ORG Member
- Posts: 10
- Joined: Sun Mar 04, 2018 7:57 pm
- City: Hummelstown
- State: PA
Re: which headers fit ??
no help from QA1 but I picked up a pair of TTI 383-178 headers from Rob's Rod Shop in Downington PA. (great mopar guy). The collector just bumps the transmission crossmember. I cut of the collector and in the process of welding on short radius 90 bend to get under it then weld on the end..
so far so good will post pics when complete
so far so good will post pics when complete
-
- Sweptline.ORG Member
- Posts: 10
- Joined: Sun Mar 04, 2018 7:57 pm
- City: Hummelstown
- State: PA
Re: which headers fit ??
with modification the header slid right in with about an inch clearance from the crossmember.
-
- Sweptline.ORG Member
- Posts: 19
- Joined: Sun Feb 10, 2008 9:21 pm
- City: central IL 1GY76
- Location: central IL
Re: which headers fit ??
off topic but
how does the QA1 kit fit? any issues
I wanted to buy one from Gerst before he sold to QA1
thanks
how does the QA1 kit fit? any issues
I wanted to buy one from Gerst before he sold to QA1
thanks
65 d100 440 tubed,70 Dude, 71 Dude,84 crewcab ccummins,85 crewcab beater
-
- Sweptline.ORG Member
- Posts: 10
- Joined: Sun Mar 04, 2018 7:57 pm
- City: Hummelstown
- State: PA
Re: which headers fit ??
for me it bolted right up, I'm doing a ground up rebuild so will be awhile before it's out for a road test.