Two metal bed shims
-
- Sweptline.ORG Member
- Posts: 373
- Joined: Sat Jul 27, 2013 5:57 am
- City: Clinton
- State: TN
Two metal bed shims
Ok So when we took off my bed two metal shims fell out, not sure which wood blocks they were under, does anyone know? Thanks
-
- Sweptline.ORG Pioneer
- Posts: 7384
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Two metal bed shims
Look for a matching imprint in the wood, or on the frame.
Re: Two metal bed shims
They were probably under the wood blocks where the frame curves down toward the back. I just finished installing new hardwood blocks, that I made, on my truck to level the bed and also raise it to accept the freshly rechromed rear bumper so the tailgate doesn't rub. BigG I cut the blocks on an angle and left out the shims.