Page 1 of 1
Headers for a 63 D100
Posted: Wed Dec 08, 2010 8:55 am
by 63swept
Does anyone know what headers will work for a 63 D100 with a 273?
Re: Headers for a 63 D100
Posted: Wed Dec 08, 2010 11:17 am
by Hobcobble
63swept wrote:Does anyone know what headers will work for a 63 D100 with a 273?
Check out the Hedmann #79010 headers.
John
Re: Headers for a 63 D100
Posted: Wed Dec 08, 2010 1:52 pm
by kman1226
Hedman's website says those are for 67-71. What would make them different that wouldn't work on a '63? Has anyone used these for a '63?
Re: Headers for a 63 D100
Posted: Wed Dec 08, 2010 2:09 pm
by soopernaut
kman1226 wrote:Hedman's website says those are for 67-71. What would make them different that wouldn't work on a '63? Has anyone used these for a '63?
Probably the fact that a 63 would have come with a Poly.
Re: Headers for a 63 D100
Posted: Wed Dec 08, 2010 2:59 pm
by Hobcobble
I'm going from the information above. It says a 273 Cu.In..
Demulsion has used these with his LA318 in his '68 D200.
The '63 D100 will have the same frame design. I'm assuming
the 273 will have the same exhaust ports as an LA318.
John
Re: Headers for a 63 D100
Posted: Thu Dec 09, 2010 9:01 am
by kman1226
That is what I was thinking both Soopernaut and Hobcobble.
Re: Headers for a 63 D100
Posted: Thu Dec 09, 2010 9:55 am
by 63swept
Thank you all for your input. Thats exactly what I needed.
Re: Headers for a 63 D100
Posted: Fri Dec 10, 2010 2:32 pm
by 61pwcc
Until I found the Dodge burial ground this weekend, I didn't now Dodge pick-ups came with a 273 soo early! I saw a 63' W200 w/273.
Re: Headers for a 63 D100
Posted: Sat Dec 11, 2010 7:48 am
by soopernaut
61pwcc wrote:Until I found the Dodge burial ground this weekend, I didn't now Dodge pick-ups came with a 273 soo early! I saw a 63' W200 w/273.
They didn't ever come with a 273. I suppose anything is possible but these are the engines that Dodge put in Sweptline era trucks: 170,198,225,318,361,383,413,426. The 361 seems to be only medium duty.
Re: Headers for a 63 D100
Posted: Sun Dec 12, 2010 6:37 pm
by Cageman
if its an auto, those headers will fit, manual has a different trans mount in the 68 to older that interferes
67 is the first year of la 318's
Re: Headers for a 63 D100
Posted: Sun Dec 12, 2010 8:26 pm
by Hobcobble
Cageman wrote:if its an auto, those headers will fit, manual has a different trans mount in the 68 to older that interferes
67 is the first year of la 318's
I believe the #79010 Hedmann headers pretty
much fit all pre-'69 D100/D200 trucks with
auto or manual trannys. If someone knows
anything to the contrary, please chime in.
John