Help pls!
-
- Sweptline.ORG Member
- Posts: 22
- Joined: Wed Jul 01, 2020 4:03 am
- City: san leandro
- State: CA
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3018
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: Help pls!
Scrape. Wire wheel. Elbow grease.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
Re: Help pls!
If it's the glue that was on the headliner, then you can try denatured alcohol or acetone. Use good ventilation with acetone. Try a small spot first to see if removes the paint. Lots of rags and rubbing required. If it's rust...see above
1970 W200
318, NP 445
Factory LU-2 winch
A/C, HD Gauges
318, NP 445
Factory LU-2 winch
A/C, HD Gauges
- swptln
- Sweptline.ORG Member
- Posts: 457
- Joined: Tue Oct 02, 2012 8:31 pm
- City: East Brookfield
- State: MA
- Location: Massachusetts
- Contact:
Re: Help pls!
DA with 80-grit.
Mark D.
61-71 Dodge Truck Association
http://www.sweptlinesunlimited.com
1968 W200 Sweptline
1969 D100 Utiline
1993 D250 Club Cab
61-71 Dodge Truck Association
http://www.sweptlinesunlimited.com
1968 W200 Sweptline
1969 D100 Utiline
1993 D250 Club Cab
- martincom
- Sweptline.ORG Member
- Posts: 448
- Joined: Thu Jul 30, 2020 10:04 am
- City: Five Points
- State: AL
Re: Help pls!
I can't tell for certain from the photos, but it appears to be the remnants of the fossilized foam backing of the headliner material. I didn't spend a lot of time on mine. I scraped off what I could with a scraper, vacuumed, and gave it a wipe down with enamel reducer. I applied Hushmat to the bottom side of the roof panel, which bonds strongly to just about anything but dust and an oil. I pre-tested the Hushmat to make sure the headliner adhesive would bond firmly to its foil backing. It is much simpler than all that cleaning with the added plus of sound deadening and a thermal barrier.
1*1971 D100 318 A/T
1*1970 Charger R/T 440-6PK A/T
2*1969 Daytona Charger 440 A/T
1*1969 Coronet R/T awaiting restoration
1*1969 Torino Talladega awaiting restoration
1*1970 Charger R/T 440-6PK A/T
2*1969 Daytona Charger 440 A/T
1*1969 Coronet R/T awaiting restoration
1*1969 Torino Talladega awaiting restoration
- 64D100Poly
- Sweptline.ORG Member
- Posts: 126
- Joined: Mon Dec 28, 2020 12:44 pm
- City: Vancouver
- State: WA
Re: Help pls!
Knock off the loose stuff, drill with wire wheel then hit it with some Ospho or similar chemical to covert it to black iron oxide, lay down some old towels to prevent drips from getting on stuff.
-LB
-LB
A grinder & paint make me the welder I ain't
-1965 (early) D100 Sweptline Daily
-1961 Dodge Dart Pioneer
-1968 Barracuda Formula S
OO\===/OO
-1965 (early) D100 Sweptline Daily
-1961 Dodge Dart Pioneer
-1968 Barracuda Formula S
OO\===/OO