Haven't been on here for a while due to moving and health. Every thing squared away now. Looking for new window channels for the door glass. Thought I had a listing of where to get them but can not find it. The old ones are rust off at the bottom.
Any help would be greatly appreciated. I'll post some pictures when I get her back from the body man.
Window Channela
-
powerwagon54
- Sweptline.ORG Pioneer
- Posts: 1336
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Washougal
- State: WA
- Contact:
Re: Window Channela
I have the window tracks. pm sent
-
PowerPlus
- Sweptline.ORG Member
- Posts: 7
- Joined: Tue Jan 10, 2017 12:49 pm
- City: Fort Wayne
- State: IN
Re: Window Channela
I just rebuilt mine and used CR Laurence part # CP651139 . It's a 48" piece so 1 stick is enough for both doors. Hope this helps some of you out there. They are maybe 1/16" shorter but they worked perfectly! I marked the roller tracks using a t square and stacking the new channel on top of the old one so I knew where to weld them back on the new channel.