Sweptline.ORG

I need some pics or an explanation on how to connect the door lock to the door handle and or latch. I don't have any rods, but can make them, just don't know how they are supposed to go. Thanks!

Nothing, hmmmm!!

Do you have the lock cylinder swivel brackets that attach to the door with (2) Philips head screws?

I don't know what that/those are.

hope this helps.

Thanks for the pics....And I'm missing all those components, gonna have to hit junkyard.
Thanks fellas, I appreciate your help!!

I have pictures of this from a door I cut open, fairly simple, just make sure you get ALL the stuff. Lock cylinder lhas a slide clip, asst. screws, etc. Lock cyls. can be rekeyed to the same key if they match. If you don't find the parts , call me at 209-712-1186, I may have them, or also email pictures if needed . BigG

Well, I got into the doors today and found that everything was there minus the door locks. I got a set for an early b body and made a stud...as another member did here on the forum, and bingo, I'm in business. So I thank all of you guys for the help/info as it was a big help.

I guess I spoke too soon. The pass. side lock broke, so now I'm on the hunt for another set.