Sweptline.ORG

I have a 1969 D100 pickup with a slant 6 that is missing the column completely. It used to have a 3 speed shifter on the column as well. I bought the truck this way with the intent to fix it up.

I need a complete steering column with 3 spd shifter on the column and steering wheel.

I understand that a 62, 63 and 64 will not work (different mounting positions, different steering box sizes.

Will a 68 column work on the 69?

Please help.

Thanks, FrankyB

I konw the plate that hold's it to the floor is different , might have to rewire it as well , not to sure on the bolt up the rag joint , hold it to it & see , the rest can be made to fit

The '69-'71 3spd manual column shifters are the same.
The '61-'68 3spd manual column shifters are different
than the '69-'71 columns.

I suppose with some mods, you could make an earlier
column work for your application. If it were me, I'd
beat the bushes for a '69-'71 column
John

Thanks John

i put in on the other thread with out knowing more. sucks about the 68 i knew they changed somewhere around there