I finally got the Philips screw head on the vent window pivot to turn after a lot of convincing. Now it's just spinning in place. Is there something acting as a nut on the other side of the vent window frame? Or is that all part of the pivot screw on the other side?
I did the other side a few months ago and can't remember
________________________________
67 Fargo W100 Utiline
52 International L-110
Are you talking about the screw that holds the vent window frame to the door? The one in the attached picture? If so, there is a spring steel U nut on the door that it screws into.
(Picture stolen from Jim's restoration CD)
1965 Dodge D200, 318 4-speed converted to 4x4 with NV4500 trans
So the pin at the top is suppose to stay in framing or glass and screw comes out? Mine screw was spinning pin also, so I took screw out at bottom and came right apart. I would to fix top now while I have apart if so.
So the pin at the top is suppose to stay in framing or glass and screw comes out? Mine screw was spinning pin also, so I took screw out at bottom and came right apart. I would to fix top now while I have apart if so.
No, the pin is part of the screw and it comes OUT. The only "PIN" is at the bottom of the vent glass frame where is swivels.
"Photo not stolen " In your pic at the top of framing I zoomed in and now I see that the part I was calling a pin is part of that phillips screw. It almost looks in pic like there is a nutsert that it threads into and maybe that is the loose part we are both having issues with?
"Photo not stolen " In your pic at the top of framing I zoomed in and now I see that the part I was calling a pin is part of that phillips screw. It almost looks in pic like there is a nutsert that it threads into and maybe that is the loose part we are both having issues with?
Thanks for explaining
OK, Yeah, I know what you mean. The "SCREW" is threaded at the TOP, and the bottom of the "screw" is a pin and the whole thing should come out when you unscrew it. I can't remember what the frame with the female threads looks like. I'll have to see if I have a frame I can get a picture of without the screw/pin inserted.