Speakers
-
- Sweptline.ORG Member
- Posts: 114
- Joined: Sat Mar 14, 2009 11:56 pm
- City: St.George UT
Speakers
Well....someone already cut holes up in the cab behind the doors. And i've got some 5 1/4's to fit there. But what are you guys doing about speakers up front? You can't really cut into the front kick panels because of the core support behind, and i really hate to put speaker in doors built like these. Is there anyone out there making kick panels from fibergalss or somthing? Just thought id check, haven't really found anything searching the web or this site for the last few days. Thanks in advance for any suggestions.
- RussRoth
- Sweptline.ORG Pioneer
- Posts: 1345
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Vancouver, WA
- Location: Vancouver, WA
- Contact:
Re: Speakers
Someone did make fiberglass ones but I don't know who that was. I have a couple of them hanging on the kick panels with industrial velcro. They have been there almost 10 years (sheesh, been that long???
). Never had any trouble with them falling off and in fact the couple times I had to pull one out it was quite a chore. The industrial stuff doesn't want to let go. I don't recall where I got it.

RR
Vancouver, WA
'67 W200/450 CID
AA OD/SM465/205
PTO winch
4.10 powerlock
8R19.5 tires
Vancouver, WA
'67 W200/450 CID
AA OD/SM465/205
PTO winch
4.10 powerlock
8R19.5 tires
Re: Speakers
I plan on doing two tucked up under the dash, just not in the center speaker hole. That's me sunglass holder ;) Does anyone on here mount there speakers up in the back of the cab? I don't even know which wire plugs into my radio it was unplugged antenna and speakerless when i got it. So I rock the 80s boombox. Oh and i think aluminum speaker boxes would be cooler than fiberglass easier and cleaner to make too.
-
- Sweptline.ORG Member
- Posts: 770
- Joined: Wed Dec 31, 1969 6:00 pm
- City: LaA
- State: CA
- Location: CA
Re: Speakers
Made by a member here: This is pass side


Last edited by tom-adc on Thu Jun 04, 2009 2:16 pm, edited 1 time in total.
-
- Sweptline.ORG Member
- Posts: 770
- Joined: Wed Dec 31, 1969 6:00 pm
- City: LaA
- State: CA
- Location: CA
Re: Speakers
Drivers side:


- wide65
- Sweptline.ORG Pioneer
- Posts: 1487
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Colorado
- Contact:
Re: Speakers
That is pretty slick! 

- soopernaut
- Sweptline.ORG Pioneer
- Posts: 8952
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Des Moines,IA
Re: Speakers
I'm pretty sure it is Hotrodjohn68.surfnuke9 wrote:the members name?
-
- Sweptline.ORG Member
- Posts: 770
- Joined: Wed Dec 31, 1969 6:00 pm
- City: LaA
- State: CA
- Location: CA
Re: Speakers
soopernaut wrote:I'm pretty sure it is Hotrodjohn68.surfnuke9 wrote:the members name?
That sounds right, these are really well made.

-
- Sweptline.ORG Member
- Posts: 114
- Joined: Sat Mar 14, 2009 11:56 pm
- City: St.George UT
Re: Speakers
Thats what i'm looking for..maybe with a tweeter componet setup....tried to email hotrodjohn68 but haven't heard back. May modify a set of Q-Logic speaker kick panels ment for another application.
-
- Sweptline.ORG Member
- Posts: 770
- Joined: Wed Dec 31, 1969 6:00 pm
- City: LaA
- State: CA
- Location: CA
Re: Speakers
Do search on the board, there are drawings of speaker boxes that will fit under the seat. These held a 6 x 9 speaker.
Here try this viewtopic.php?f=21&t=9313
Here try this viewtopic.php?f=21&t=9313

- rx1mtnman
- Sweptline.ORG Member
- Posts: 155
- Joined: Sat Nov 28, 2009 1:21 pm
- City: Harlowton
- State: MT
Re: Speakers
Does anybody have any pics of these? Says they have been removed.
**The Dodge List**
1972 W-100 318
1970 W-200 CrewCab 383 (project)
2011 RAM 2500 CC Cummins4X4
2008 Ram 1500 QC 4X4 Hemi
1972 W-100 318
1970 W-200 CrewCab 383 (project)
2011 RAM 2500 CC Cummins4X4
2008 Ram 1500 QC 4X4 Hemi