Turn Signal Lever

mightydodge · Post by **mightydodge** » Sun Feb 04, 2007 2:40 pm

Does anyone know how to remove the turn signal lever from the steering column? I have a 1968 D-100 with three on the tree. My manual states to remove the set screw and then pull out the lever, but I don't see the screw. Grateful for any help someone can provide.

Thomas · Post by **Thomas** » Sun Feb 04, 2007 3:18 pm

I have a 68 and my turn signal lever IS a screw. Have you tried turning it?

mightydodge · Post by **mightydodge** » Sun Feb 04, 2007 3:32 pm

Hadn't tried that yet. Didn't want to break a part I'd have a hell of a time finding again. Thanks for the help!

MoparN · Post by **MoparN** » Sun Feb 04, 2007 4:36 pm

My 68 D200 auto with the shifter on the dash also just unscrews. It is threaded on the end.

Jeffc · Post by **Jeffc** » Sun Feb 04, 2007 5:00 pm

Yes should be threaded on the end, you should also
see two flat spots near the columm were you can use
a wrench on it if needed.......