Sweptline.ORG

Just bought a 1970 D-200 3/4 Ton pick-up. First time owning a Mopar truck. The front end sheet metal is trashed and I need a replacement front clip. What years will interchange and does anyone know of any parts trucks in the Seattle area? Had no luck so far at the wrecking yards. Thanks,
Tattooman

about any fender 61-71 D or W 100 or 200 will fit
BUT only 70-71 have the side marker lights
69-71 hood are the same

Don may have some parts or know where to look
he should be heading back to Federalway soon

you can also buy them new!!!!!!!

tatman, if you change the hole front , rad suport include they all will interchange , fred is right about the 70-71 haveing the side lights only

I may be wrong, but I think that the core supports for the early '65's
and back had extra recesses for the 4 headlamp set up and different
mounting points/hardware for the grills. The '68 & earlier fenders will
work but if you're going to use '70 fender plaques, you'll more than
likely have to drill more holes to mount them. The '61 through '67 hoods
had the drop lip to follow the 4 headlamp and pie plate set ups. The '68
hoods were a one year hood with the straight lip but still kept the louvres
on the top. The '69-'71 hoods were the same but they had their own
hood latches.... you'd have to match up the appropriate year latches.
Hope some of this helps.
John

John, you are correct

John, I believe the hood latch changed between 69 and 70. On my 69 you reach through the grill to open the hood, but I believe the 70 -71 latch sticks out the front above the grill.

Russ,
Thats a good point..... seeing as though the '68 & '69 grill are the same.
Thanks for bringing that up! Something else I thought of is the
secondary hood latch.... what year did they start showing up??
John

I've got a real nice set of fenders which I'm keeping, but I've also got a set of "NO RUST or BONDO" fenders that could use minimal body work to straighten out. I'll be in Federal Way August 15th thru the 17th. Email me if interested.

Thanks.....Don