Stock height measurement

[Volksnut]

what is the stock height of a d100, say from the ground to the top of the wheel opening on the fender.

[martincom]

Tire size would change that number. I can measure mine from the center of the wheel to the bottom of the wheel opening. However, mine seems to be a bit high in the front of low in the back, so I'm not sure if I would be a good reference.

[my5thmopar]

Tire height won't matter if you measure fender lip to center of bearing hub. What's the point here? Theses trucks are all over the map anyway. My

[Volksnut]

Tire height won't matter if you measure fender lip to center of bearing hub. What's the point here? Theses trucks are all over the map anyway. My

Just tying to get a general idea, I just ordered some Eaton -3 lowered springs to replace the butchered springs that are in it....Thats all

[johnah]

i'm thinking my was 35 to 36" on 15" wheels and a 29" tire. After Sid's 3" drop and new Detroit springs with a 1" drop I'm at 29".

Until then swept on, John

[johnah]

i'm thinking my was 35 to 36" on 15" wheels and a 29" tire. After Sid's 3" drop and new Detroit springs with a 1" drop I'm at 29".

Until then swept on, John