D200 crew cab king pin help

[Oshork67]

image.jpg (20.18 KiB) Viewed 864 times

I'm trying to remove my spindles and king pins it looks like there I a pin pressed in the front of the spindle retaining the king pin. The back has a open hole I'm assuming I need to drive the pin out to remove the king pin. The large hole is where the keyed steering arm bolts in. Any help would be appreciated.

[Hobcobble]

Although this diagram is for the D400 axle, it might help you.
http://www.sweptline.org/suspension63_68/02-08.gif

John

[Oshork67]

That does help thanks I guess a little time with a punch and BFH is in order

[kurt]

I took my crew axle to a machine shop that also had the proper reamer to do both top /bottom at the same time.