Poly Intake Manifold
-
- Sweptline.ORG Member
- Posts: 7
- Joined: Thu Sep 28, 2023 9:21 am
- City: Fernley
- State: NV
Poly Intake Manifold
Hey all. My name is Todd,, and am located in Northern Nevada. I joined recently, but have been lurking along time. We have been working on our old 64 crew cab w200 for a bit. It has been in my wife's family for 40 years. We aquire it a number of years ago but finally focused on getting her back on the road. I have been casually looking for a 4 barrel intake for it for years. Currently have a carter BBD on it now but would love a 4 barrel some day. Figured I would ask here and see if anyone might have a poly 318 intake they are willing to part with. I would prefer the dodge cast manifold, but would take a aftermarket aluminum one if it were an option. Any leads on one let me know please.
-
- Sweptline.ORG Pioneer
- Posts: 7384
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Poly Intake Manifold
The original cast manifolds are extremely scarce and more so on trucks. Search the old car world too.
I've only ever seen one, it was over 20 yrs ago on a D100 in a wrecking yard. Got it, then sold it a few yrs later.
I've only ever seen one, it was over 20 yrs ago on a D100 in a wrecking yard. Got it, then sold it a few yrs later.
-
- Sweptline.ORG Member
- Posts: 7
- Joined: Thu Sep 28, 2023 9:21 am
- City: Fernley
- State: NV
Re: Poly Intake Manifold
Yeah, I realize they are rather scarce. I just thought I would throw it out there, you never know the answer if you do not ask the question.
-
- Sweptline.ORG Member
- Posts: 458
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: Poly Intake Manifold
I frequent the shows in Carlisle pa.NevadaCrew wrote: ↑Mon Oct 16, 2023 9:32 amYeah, I realize they are rather scarce. I just thought I would throw it out there, you never know the answer if you do not ask the question.
I have seen a half dozen or so. The single 4 barrel steel manifolds are about 550. I saw one dual quad for 450. I don’t know if they were from a truck or not.
There is also an offenhauser aluminum manifold. I have only seen them online.
I decided against the poly 318 idea. Now I am far to deep into the big block conversion to turn back.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
-
- Sweptline.ORG Pioneer
- Posts: 7384
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Poly Intake Manifold
The dual quads are less money, probably because getting carbs that fit is a big hassle.
-
- Sweptline.ORG Member
- Posts: 7
- Joined: Thu Sep 28, 2023 9:21 am
- City: Fernley
- State: NV
Re: Poly Intake Manifold
I have been gathering parts to go big block for years, I have everything now but there is a part of me that likes the poly. Seems a little more unique and different. 3 duces would be cool too but again, a pain to tune. I know they are not cheap. If anyone comes across one keep me in mind!
- Red383
- Sweptline.ORG Member
- Posts: 344
- Joined: Tue Dec 18, 2012 7:45 am
- City: Fort Loramie
- State: OH
Re: Poly Intake Manifold
I hear the Holley 2300 500 cfm 2bbl's with the Transdapt adapter make the poly run pretty good.
1965 Dodge D200, 318 4-speed converted to 4x4 with NV4500 trans
-
- Sweptline.ORG Member
- Posts: 25
- Joined: Mon Sep 24, 2018 4:12 pm
- City: Fort Collins
- State: CO
Re: Poly Intake Manifold
I have a poly Edelbrock P600 (triple deuce) in my stockpile. PM if interested.
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1774
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: Poly Intake Manifold
Northern Nevada? Ever been to Perrry Spring? It's a pretty special place.NevadaCrew wrote: ↑Sun Oct 15, 2023 8:07 pmHey all. My name is Todd,, and am located in Northern Nevada.
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
-
- Sweptline.ORG Member
- Posts: 7
- Joined: Thu Sep 28, 2023 9:21 am
- City: Fernley
- State: NV
Re: Poly Intake Manifold
Yeah, Northern Nevada. Pretty much the Reno/Sparks area. Never been to Perry Spring, might have to put that on the to do list!
- Txas2step
- Sweptline.ORG Pioneer
- Posts: 3416
- Joined: Mon May 31, 2010 7:26 am
- City: houston
- State: TX
Re: Poly Intake Manifold
You might check with Gary Pavlovich in California. He is a Poly Guru and great guy. PM me and I'll send you his contact info.
61 shorty 170/ 3spd 3:91(sold)
66 lwb 318 poly/727/4:10 (sold)
67 shorty 318poly/4spd 3:55
68 ute 318/3 spd/3:55(sold)
70 318/727/3:23
66 d200 225/4spd/4:10( military)(sold)
68 d100 383/727/3:55
66 lwb 318 poly/727/4:10 (sold)
67 shorty 318poly/4spd 3:55
68 ute 318/3 spd/3:55(sold)
70 318/727/3:23
66 d200 225/4spd/4:10( military)(sold)
68 d100 383/727/3:55