Wondering if a rear axle from a 91 d250 would bolt into my 71 d200? It's on Craigslist and I think it should be a Dana 60. I'd rather have it if it is a 3.54 and get rid of the funky reverse threads on one side and possibly better drums too.
Any info would be appreciated.
Will 91 D250 axle bolt in?
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3019
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: Will 91 D250 axle bolt in?
Yes it will. You may have to deal with U joint difference and some other minor stuff. Nothing major.Tony292 wrote:Wondering if a rear axle from a 91 d250 would bolt into my 71 d200? It's on Craigslist and I think it should be a Dana 60. I'd rather have it if it is a 3.54 and get rid of the funky reverse threads on one side and possibly better drums too.
Any info would be appreciated.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
- slick
- Sweptline.ORG Pioneer
- Posts: 3096
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Tucson/AZ
- State: AZ
- Location: Tucson, AZ
- Contact:
Re: Will 91 D250 axle bolt in?
Might be a Dana 70 or 71. Depending on the truck it could possibly have a single track 3.08 gear. I think the gear selection for a a Dana 71 is limited..,
1963 Crewcab Cummins
1961 Dodge D100
1964 Dodge Polara
1961 Dodge D100
1964 Dodge Polara
- 66patrick
- Sweptline.ORG Pioneer
- Posts: 5038
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Central
- State: OK
- Location: OK
Re: Will 91 D250 axle bolt in?
My '91 had a Dana 70 with 3.55 gears, and my '93 350 Dually had the same axle with 3.73 gears.
[b]Patrick - 1969 D300 cab & chassis[/b]
- Jhollett
- Sweptline.ORG Member
- Posts: 85
- Joined: Mon Jul 14, 2014 10:17 am
- City: Norris Arm
- State: Foreign
- Location: Norris Arm, NL
Re: Will 91 D250 axle bolt in?
I just put an 89 D250 Dana 60 in my 69. The perches are off by millimeters but you can pull the leafs enough for it to fit. Overall it is slightly wider but like it was meant to be. Good luck!