going to make the swap
-
prosparky475
- Sweptline.ORG Member
- Posts: 40
- Joined: Tue Feb 16, 2010 4:57 pm
- City: Omaha
- State: NE
going to make the swap
I'm going to swap the 318 for the 383. I found the right bell housing but my dumb question is will my flywheel clutch pressure plate from my small block work or do I have to get new ones for the big block set up?
-
dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3066
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: going to make the swap
Flywheel will work but BB Bell housing has different starter than SB Bell housing. This assumes your dealing with the 68 n older bell housing.