HUMVEE tires/wheels
- menefreghista762
- Sweptline.ORG Member
- Posts: 220
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Baytown
- State: TX
- Location: Texas
- Contact:
HUMVEE tires/wheels
These tires size out @ 36" x 12.5" x 16.5", load range "C". Maybe just some wagon wheels in 16.5x11? Right now the military is upgrading all HUMVEES to 37" tires. I see a set on wheels near me for $600.....or just tires 60-70% tread left for $40ea......need some chassis/suspension work to fit this....input out there
They would make a wagon look really tough(er)
HUMVEE MILITARY TIRES
H1 RIMS W/ CIVI WRANGLERS
They would make a wagon look really tough(er)
HUMVEE MILITARY TIRES
H1 RIMS W/ CIVI WRANGLERS
[color=#FF0000]"Catfish"
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
- powerwagoncrazy
- Sweptline.ORG Member
- Posts: 615
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Hubbard, OR
- State: OR
- Location: Hubbard, OR
Re: HUMVEE tires/wheels
Well, I know the H1 wheels have a really funky offset and won't fit anything besides the H1 without re-centering... This being said, the tires themselves are pretty killer- I'm running them on my '67 W200... They fit with no trimming, but I do have Skyjacker springs under the front.... (8" for '69-'93 gas powered, or 5-6" 0n the '68 and earlier trucks... 4" for me due to 600#s of winch, bumper, and a 383 riding on them ). My only complaints are that they seem to wear really funny and are light weight- max psi is 30lbs!!!! They are grizzly lookin' meats though, and they do well in the traction department!!!
'66 Cummins W250 5 spd crew cab long bed
'67 W200 Cummins, never-ending project
'74 Ramcharger Cummins 5 speed
'02 24v quad cab 6 speed dually 4x4
'67 W200 Cummins, never-ending project
'74 Ramcharger Cummins 5 speed
'02 24v quad cab 6 speed dually 4x4
- menefreghista762
- Sweptline.ORG Member
- Posts: 220
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Baytown
- State: TX
- Location: Texas
- Contact:
Re: HUMVEE tires/wheels
Yeah, those look like they can really chew up some mud! Tell me what size rims you put them on. The HUMVEE combat rims (2 piece) are 10" wide. Nice looking wagon too
[color=#FF0000]"Catfish"
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
- powerwagoncrazy
- Sweptline.ORG Member
- Posts: 615
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Hubbard, OR
- State: OR
- Location: Hubbard, OR
Re: HUMVEE tires/wheels
8.25x16.5's- they fit really well...
- Skunkman
- Sweptline.ORG Member
- Posts: 8
- Joined: Thu Nov 15, 2007 5:00 am
- City: Nicholasville, KY
- Location: Kentucky
- Contact:
Re: HUMVEE tires/wheels
[quote="powerwagoncrazy"]Well, I know the H1 wheels have a really funky offset and won't fit anything besides the H1 without re-centering...
quote]
Are you refering to military HUMVEE rims or H1 'Take-Off's'? or are they the same. You can find a pretty good deal on ebay once in a while. Thought I might buy some 'take-offs', but if your saying the backspace is crazy, I dont think I want to have to deal with spacers.
quote]
Are you refering to military HUMVEE rims or H1 'Take-Off's'? or are they the same. You can find a pretty good deal on ebay once in a while. Thought I might buy some 'take-offs', but if your saying the backspace is crazy, I dont think I want to have to deal with spacers.
- powerwagoncrazy
- Sweptline.ORG Member
- Posts: 615
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Hubbard, OR
- State: OR
- Location: Hubbard, OR
Re: HUMVEE tires/wheels
Military Humvees are the H1, and they have the really funny offset. As the forums you posted links to said, re-centering is a must, otherwise your tires will rub on everything. The H2 is the newer civilian market Humvee, and they have aluminum wheels- they'll just about fit but you have to cut the center holes out a bit to get them over the hubs. Unless you're pretty good with a welder, I'd say just wait and buy some that don't need to be altered...
'66 Cummins W250 5 spd crew cab long bed
'67 W200 Cummins, never-ending project
'74 Ramcharger Cummins 5 speed
'02 24v quad cab 6 speed dually 4x4
'67 W200 Cummins, never-ending project
'74 Ramcharger Cummins 5 speed
'02 24v quad cab 6 speed dually 4x4
- menefreghista762
- Sweptline.ORG Member
- Posts: 220
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Baytown
- State: TX
- Location: Texas
- Contact:
Re: HUMVEE tires/wheels
Picked up five of the military take offs. $100 for all, about 50-60% tread left. Stopped and searched through a used tire shop's pile of old rims and found five wagon wheel rims 16.5 x *, 8 on 6.5 wheels. Rough and rusty, but can be blasted clean and painted. $50 for all. Now all need to do is get the truck here and install!
[color=#FF0000]"Catfish"
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
Re: HUMVEE tires/wheels
menefreghista762...
Here's some pics of my '68 W-200. I still have the H-1's on the back and wagon wheels on the front. I wish I could find 2-3 more wagon wheels so i could put them on the back. If i could i would get rid of my H-1 rims, i have 6 of them total I think.
On the front with the H-1's the RIMS were actually rubbing. And the guy that i bought it from had to cut a little bit of the corners off of the front of the fenders.
Where are you finding the military tires at? Im going to need a set later.
Oh and as far as grip, man it goes through mud like it aint nothing! Very happy with these tires, haven't got it stuck yet. been through some terrible stuff too. You can ask Cowboy about this truck, it performs really well with these tires on it.
Here's some pics of my '68 W-200. I still have the H-1's on the back and wagon wheels on the front. I wish I could find 2-3 more wagon wheels so i could put them on the back. If i could i would get rid of my H-1 rims, i have 6 of them total I think.
On the front with the H-1's the RIMS were actually rubbing. And the guy that i bought it from had to cut a little bit of the corners off of the front of the fenders.
Where are you finding the military tires at? Im going to need a set later.
Oh and as far as grip, man it goes through mud like it aint nothing! Very happy with these tires, haven't got it stuck yet. been through some terrible stuff too. You can ask Cowboy about this truck, it performs really well with these tires on it.
1967 W100 Short Bed 3 speed
1995 Dodge 2500, 12 Valve, reg. cab, 5 speed, 2wd
2018 2500 4x4 Megacab 6.7 cummins
_________________________________________
'
1995 Dodge 2500, 12 Valve, reg. cab, 5 speed, 2wd
2018 2500 4x4 Megacab 6.7 cummins
_________________________________________
'
- mowingman
- Sweptline.ORG Member
- Posts: 232
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Denton, Tx.
- Location: Denton, Tx.
Re: HUMVEE tires/wheels
The 16.5 " wheels that were used on a lot on Dodge trucks and vans, back in the 60's and 70's, will work fine on your Sweptline with the 8 bolt pattern. You will have to use a lift kit though. I have a set of Hummer 36" tires on my 77, M882 pickup. There is no lift kit on this 4x4 and they just barely clear the fenders. Here is a photo.
Jeff
Jeff
1979 Plymouth Trailduster, 360/auto.
1989 W150 Power Ram shortbed pickup, 318/auto.
1970 W200 Power Wagon long/wide bed, 383/4spd.
1989 W150 Power Ram shortbed pickup, 318/auto.
1970 W200 Power Wagon long/wide bed, 383/4spd.
Re: HUMVEE tires/wheels
Nice lookin truck Jeff. I'll have to try and find some of those rims, cuz I really love these tires. I'm no 4x4 expert, but so far I've had good experiences with these tires as far as mud gripping.
1967 W100 Short Bed 3 speed
1995 Dodge 2500, 12 Valve, reg. cab, 5 speed, 2wd
2018 2500 4x4 Megacab 6.7 cummins
_________________________________________
'
1995 Dodge 2500, 12 Valve, reg. cab, 5 speed, 2wd
2018 2500 4x4 Megacab 6.7 cummins
_________________________________________
'
- mowingman
- Sweptline.ORG Member
- Posts: 232
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Denton, Tx.
- Location: Denton, Tx.
Re: HUMVEE tires/wheels
The 16.5 wheels are not popular at all, and regular 16.5 tires are very expensive. You should be able to find these wheels really cheap, at most salvage yards, as nobody wants them anymore.
Jeff
Jeff
1979 Plymouth Trailduster, 360/auto.
1989 W150 Power Ram shortbed pickup, 318/auto.
1970 W200 Power Wagon long/wide bed, 383/4spd.
1989 W150 Power Ram shortbed pickup, 318/auto.
1970 W200 Power Wagon long/wide bed, 383/4spd.
Re: HUMVEE tires/wheels
WOW! I thought I was the only one with the bright idea to put hummer tires on my swept line!
'71 D200, 305 chevy, 700R4, NP208, 10 bolt front 5.13s and lockright, rear Dana 60 with detroit and 5.13s, 36" hummer tires.
- menefreghista762
- Sweptline.ORG Member
- Posts: 220
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Baytown
- State: TX
- Location: Texas
- Contact:
Re: HUMVEE tires/wheels
I found a set of 16.5 wagon wheels that need blasting and cleaning, paid $50 for all 5 of them. I have a friend that buys surplus and he turned me on to the HUMVEE tires. When he gets more I will let all of you in the Houston area know.mowingman wrote:The 16.5 wheels are not popular at all, and regular 16.5 tires are very expensive. You should be able to find these wheels really cheap, at most salvage yards, as nobody wants them anymore.
Jeff
[color=#FF0000]"Catfish"
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
- menefreghista762
- Sweptline.ORG Member
- Posts: 220
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Baytown
- State: TX
- Location: Texas
- Contact:
Re: HUMVEE tires/wheels
Nice truckYuriOrlav wrote:WOW! I thought I was the only one with the bright idea to put hummer tires on my swept line!
Please detail the lift you have used there
I will need some pointers
[color=#FF0000]"Catfish"
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
Re: HUMVEE tires/wheels
menefreghista762...
I would appreciate that info on the tires. And let me know if you find 2-3 more wagon wheels I could use them.
I would appreciate that info on the tires. And let me know if you find 2-3 more wagon wheels I could use them.
1967 W100 Short Bed 3 speed
1995 Dodge 2500, 12 Valve, reg. cab, 5 speed, 2wd
2018 2500 4x4 Megacab 6.7 cummins
_________________________________________
'
1995 Dodge 2500, 12 Valve, reg. cab, 5 speed, 2wd
2018 2500 4x4 Megacab 6.7 cummins
_________________________________________
'
Re: HUMVEE tires/wheels
Well, that truck is a D200, when I got it, it had a perkins diesel in it and appeared to have some suspension mods already. I think it had custom front springs for the engine (wich I think weighed 2600 lbs.!!!), it also appears to have home fabricated rear hangers for the stock shackles??, anyways, all I've done is bolt on a chevy front axle and a small block chevy engine/700R4/208 trans case (Now the mopar purist are going flame me to death, LOL), it had WAY to much caster, so I installed 4" longer front shackles, wich is 2" actuall lift, then I installed Superlift 5" blocks and 2" AALs in the rear (available from summit). Remember though, it started as 2WD, so I'm not sure how much lift I have over a stock PW, wich was higher than a D200 to begin with. I had a custum drag link made by bullet proof steering and used skyjacker 8" longer SS braided bracke lines in front (for a chevy) and fabbed a drop bracket for my rear brake line and parking brake cables. I'm running manual steering and I'm pretty sure I'm going to have to hook up power steering pretty soon. Oh yeah, I used a 4" raised pro comp steering arm on the chevy axle also.menefreghista762 wrote:Nice truckYuriOrlav wrote:WOW! I thought I was the only one with the bright idea to put hummer tires on my swept line!
Please detail the lift you have used there
I will need some pointers
'71 D200, 305 chevy, 700R4, NP208, 10 bolt front 5.13s and lockright, rear Dana 60 with detroit and 5.13s, 36" hummer tires.
Re: HUMVEE tires/wheels
I'm running 9.75 wagon wheels on the rear and 8.25 US series 70 white spokes up front. I'll warn you, it was VERY difficult to even get the beads to span the 8.25"s to inflate them (16.5s don't have the bead lock ridge like other wheels do, so it's hard to inflate them) After that ordeal, I figured it would be REALLY hard to mount the rears, so I spread the side walls by inserting bourds and military ammo cans inside the tires to puche them out, I ledft them in my shop for a few weeks like that, then removed the spreaders right before I mounted them, it was pretty easy then.
Apperantly this is how some people seat the beads. http://www.youtube.com/watch?v=N252RPAM ... re=related
Apperantly this is how some people seat the beads. http://www.youtube.com/watch?v=N252RPAM ... re=related
'71 D200, 305 chevy, 700R4, NP208, 10 bolt front 5.13s and lockright, rear Dana 60 with detroit and 5.13s, 36" hummer tires.
- menefreghista762
- Sweptline.ORG Member
- Posts: 220
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Baytown
- State: TX
- Location: Texas
- Contact:
Re: HUMVEE tires/wheels
Big J.....I'll keep my good eye out for some extra wheels for ya. The ones I found had various offset of (2)4.5, (1)4.25, (1)4.75 and (1) at 5". I use the 5" as a spare as it is 9" wide, the others are 8" wide. There is a shop down the street that blasted and painted the wheels black for $120. So I guess I got about $40 in each wheel. What the heck, it's just an old DodgeBigJ wrote:menefreghista762...
I would appreciate that info on the tires. And let me know if you find 2-3 more wagon wheels I could use them.
[color=#FF0000]"Catfish"
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
64 W100 \6, np420, 4.10 SG, stick_WAR WAGON!!!
65 D200 318ci, stick-SOLD!
67 D200 318c, stick-SOLD!
"Once you pull the pin, Mr. Hand Grenade is no longer your friend[/color]
Re: HUMVEE tires/wheels
No offence, but for about the same $ you could've bought NEW wheels from summit racing and might not be having the trouble you are having in your other thread.menefreghista762 wrote:Big J.....I'll keep my good eye out for some extra wheels for ya. The ones I found had various offset of (2)4.5, (1)4.25, (1)4.75 and (1) at 5". I use the 5" as a spare as it is 9" wide, the others are 8" wide. There is a shop down the street that blasted and painted the wheels black for $120. So I guess I got about $40 in each wheel. What the heck, it's just an old DodgeBigJ wrote:menefreghista762...
I would appreciate that info on the tires. And let me know if you find 2-3 more wagon wheels I could use them.
'71 D200, 305 chevy, 700R4, NP208, 10 bolt front 5.13s and lockright, rear Dana 60 with detroit and 5.13s, 36" hummer tires.