Page 1 of 1
Have to move, save a 70 short bed from getting scrapped
Posted: Sun Feb 22, 2015 4:12 pm
by Rusty_Quarters
Hello,
I live in Fresno area of California,
I have to move out of my house by Thursday 2/26 can't take truck with me 360 /727 short bed. Major project with potential, I can get about $500 if I scrap body and sell engine/Trans, has pink slip, if anyone wants to save one from scrapper, 500 takes it, short bed is worth that alone if you need one.
Kent 661-808-3118 first come first serve.
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Sun Feb 22, 2015 4:34 pm
by PwrWgnDrvr
FYI Kent, and all readers:
Scrap price has gone to hell!
Last Fri delivered to the Port of Oakland:
Sheetmetal and light steel $35/ton (local $20/ton)
#1 heavy iron prepared $70/ton
see:
http://www.sikorametals.com/category/bl ... cing-news/
Feb 7
As you may know by now, scrap steel prices have taken a big hit this month. The prices have finally settled and our scale price has dropped to $85/ton for sheet iron. Unfortunately, there are several factors contributing to the decline, making a quick turnaround unlikely. The two biggest causes of the massive drop this month are decreasing worldwide demand for scrap steel and the increase in the value of the dollar. Barring a major worldwide event, we would not expect to see prices go much higher than they are now until summer at the earliest, but most likely ferrous prices will be down for all of 2015.
Non ferrous scrap prices have seen a more gradual decline over the last several months. Our scale price for scrap copper has dropped below $2 for the first time in a long time. Scrap aluminum, stainless, brass and other non ferrous materials are at similar lows. The causes are basically the same as that of the steel price decline, slowing global demand and a strong dollar. There is no price spike in sight for these materials either. Unfortunately, it looks like 2015 will be a tough year in the scrap metal business.
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Sun Feb 22, 2015 4:39 pm
by Rusty_Quarters
PwrWgnDrvr wrote:FYI Kent, and all readers:
Scrap price has gone to hell!
Sheetmetal and light steel $20-35/ton
#1 heavy iron prepared $70/ton
see:
http://www.sikorametals.com/category/bl ... cing-news/
As you may know by now, scrap steel prices have taken a big hit this month. The prices have finally settled and our scale price has dropped to $85/ton for sheet iron. Unfortunately, there are several factors contributing to the decline, making a quick turnaround unlikely. The two biggest causes of the massive drop this month are decreasing worldwide demand for scrap steel and the increase in the value of the dollar. Barring a major worldwide event, we would not expect to see prices go much higher than they are now until summer at the earliest, but most likely ferrous prices will be down for all of 2015.
Non ferrous scrap prices have seen a more gradual decline over the last several months. Our scale price for scrap copper has dropped below $2 for the first time in a long time. Scrap aluminum, stainless, brass and other non ferrous materials are at similar lows. The causes are basically the same as that of the steel price decline, slowing global demand and a strong dollar. There is no price spike in sight for these materials either. Unfortunately, it looks like 2015 will be a tough year in the scrap metal business.
All the bigger shame to see one go so cheap, had it on Craigslist trying to sell, lots of hot air no action, my hands are tied it goes Thursday no matter what.
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Sun Feb 22, 2015 11:19 pm
by lightning4x4
does it run?is it a roller or is it in pieces ?
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Mon Feb 23, 2015 8:05 am
by 66patrick
Hell, for the price, does it matter? Someone needs to snag this up at that money!!!
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Mon Feb 23, 2015 8:15 am
by Txas2step
Hey Kent, is this the same truck? Sorry to hear it has to go.

Re: Have to move, save a 70 short bed from getting scrapped
Posted: Mon Feb 23, 2015 1:14 pm
by mousecat
Wish I had the cash......Not far away at all! dang it!

Re: Have to move, save a 70 short bed from getting scrapped
Posted: Mon Feb 23, 2015 1:40 pm
by lightning4x4
true for that $ money it shouldn't matter but I always try to get more info for vehicles I buy these are just normal questions I ask .
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Mon Feb 23, 2015 6:01 pm
by Txas2step
Somebody close step up.

Re: Have to move, save a 70 short bed from getting scrapped
Posted: Mon Feb 23, 2015 7:45 pm
by Rusty_Quarters
Thank you everyone, made a deal locally, but thank you to swept liners in paso Robles, and Santa Maria, who made efforts to save it. I am not out of it yet, a local mopar guy is going to store it for me for a while in exchange for the 360 an 727, I guess I will be putting my spare 440 in it next year, I will update you all then, thank you to all the well wishers, my wife is on the heart transplant list so that is the reason for the sudden move, closer to San Francisco UCSF, priorities.
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Mon Feb 23, 2015 9:35 pm
by Txas2step
Best to you and Family.

Re: Have to move, save a 70 short bed from getting scrapped
Posted: Tue Feb 24, 2015 8:07 am
by Hobcobble
I wish your wife and all of you the best of luck.
John
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Tue Feb 24, 2015 10:49 am
by 66patrick
Best of luck with everything!
Re: Have to move, save a 70 short bed from getting scrapped
Posted: Tue Feb 24, 2015 9:59 pm
by runcharger
Best of luck, the truck isn't as important as your wife.
Sheldon