Radiator

This area is for open discussion about anything..."KEEP IT CLEAN"
Post Reply
jaxgasser
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 8
Joined: Wed Nov 25, 2015 2:53 pm
City: Ottumwa
State: IA

Radiator

Post by jaxgasser »

Putting 440 in the ol gasser has anyone used the radiators from champion ? On line for $210 plus shipping, a couple of different styles I think will work in my 66 very well good ? Bad ? Ok ? Can I go wrong ?

bamm67d100
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 150
Joined: Thu Jan 10, 2013 1:45 am
City: Scotts Valley
State: CA

Re: Radiator

Post by bamm67d100 »

I just had a champion put into my 67. Had to have a little fab work done but I don't think my mounting situation was stock to begin with. Very happy with the cooling and quality.

jaxgasser
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 8
Joined: Wed Nov 25, 2015 2:53 pm
City: Ottumwa
State: IA

Re: Radiator

Post by jaxgasser »

Thanks going from the 6 to the 440 , I actually like the one that's made for an older Impala with 4 cores , looks like it will be a very close to original fit Evan though it's wider

bamm67d100
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 150
Joined: Thu Jan 10, 2013 1:45 am
City: Scotts Valley
State: CA

Re: Radiator

Post by bamm67d100 »

I used a 3 core from them that was listed for a late 60's Charger.

jaxgasser
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 8
Joined: Wed Nov 25, 2015 2:53 pm
City: Ottumwa
State: IA

Re: Radiator

Post by jaxgasser »

Thanks for the info my motor home engine has passenger side outlet on water pump so the radiator I'm thinking about is for a 64/68 impala a little shorter and about same width so I can move it closer into the grill without hitting the crossmember
Will post pictures after it shows up sometime after Christmas

bamm67d100
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 150
Joined: Thu Jan 10, 2013 1:45 am
City: Scotts Valley
State: CA

Re: Radiator

Post by bamm67d100 »

Mine has the same outlet. And the dimensions will be close to spot on to begin with if you go with the one made for the charger.

Post Reply