Sweptline.ORG

I need help finding a heater core for my truck before winter gets here! Unfortunately I dont have the original core so I cant get it redone because the PO put in the core from the more common heater and just drilled holes into the firewal...holes that I welded up already. If anyone has access to one...

Looking at Exlines version of the cab mounts and wanted to know if anyone has used them and if so how close to original are they? I don't exactly want to fab my own but they are pretty steep price wise. Both are rotted out so I will need to replace them and I also have new floor panels but they are ...

editeddddd

Well its been lowered for 2 years and for the first 6 months of that time I drove it daily. I've flipped axles before on newer vehicles so I'm not unfamiliar with it just cant remember the number of leafs in each pack. It currently has 4" blocks and atleast 2 or 3 leafs taken out...remember I did th...

IM going to be flipping the axle and putting all the springs back in...how many were in the front and rear packs? i have a stack of leafs and cant remember how many go to each

i think there is a local shop that can do it but have to wait till tomorrow... my plan is to lower the truck even more but can't even drive it safely right now

im in dire need of some springs for my 64...the ones on my truck are plain worn out and my truck has a serious lean to the left side...most of my budget has been spent on the motor and trans build so im looking for something on the cheap. anyone know if there are other vehicles' leaf springs will fi...

i just put an edelbrock 4 barrel carb on my 318 and cant remember how the throttle kickdown goes...does it go down when the carb is at idle and moves the higher the rpms or just the opposite?

teamblend wrote:

makgreens wrote:ill let ya know how it drives when i get the brakes fixed,shocks replaced and motor tuned up ha

sounds good, howd the back turn out?

turned out pretty good actually
im anxious to drive it ha

ill let ya know how it drives when i get the brakes fixed,shocks replaced and motor tuned up ha

what abotu some air shocks front and back since the springs all have different arch

looking for alternatives to stock shocks since mine are blown and i lowered the truck

i run kyb's on my toyota and love em but dunno if they make anything thatll work for our trucks

has anyone done this modification?
i have a longbed stepside and would really love to make it a shortbed

ive seen guys do this on old fords but never on a utiline

ive gotta find new ubolts today cause i hate having my truck sit in the air ha
hopefully my work has some

ha na my stepdad ran it over about a year ago...still charges so no point in buying a new one

im dropping the rear now but need to get some new u bolts....so hopefully more pics in a few days

got my front end done today...took about 2 hours so no time at all really
i definitely need new shocks though but other than that its looking good

removed 2nd to last and 2nd to top leafs

AZ can get the parts if not have em in stock
damn i hate the company i work for

well figured out the box was bad or not getting a good ground
switched out to a new box and fired up
sounded like it was missing...replaced plugs...sounds better but not right and sounds like theres and exhaust leak now...*#%^

nope...perfect level and perfect pressure
i did also run a day without my pcv being hooked up....which is a big no no
im getting spark from the coil just not to the plugs so i think its a separate issue

replaced the oil pan gasket on my truck and it went down hill from there i had an oil leak prior to the oil pan change and thats what i thought the oil pan was leaking. so i changed it and made sure everything was perfect. well i try and start the truck and nothing..wont fire just turns over. looked...