Sweptline.ORG

went back to junk yard and got bell housing and flywheel that is all installed todays feet will be to install tranny and tranny mount

need a bellhousing to mount to my 225/6 for a a833od tranny the 3 speed one does not work and the 84 th tranny came out of does not have the mounts will the np 435 bell housing work and does any one know where to find one

any slant six with a super six intake for power a a833 od tranny and at most a 323 rear will bring you awsome gas milage and power that will burn up those 350 shitteys put it in a swepty and you are good to go

] i rebuilt my slant six 3 months ago still have to do exhaust and looking to do the a833 od also already have a 323 rear cant wait to get her on the road

PDQautomovers.com
i am a brooker and charge $100 fee on top of truckers cost for all sweptline members being i have my own sancha and if your a member and in military my fee is only $75

black wire goes to button on turnsignal switch usualy has a spring when you press horn it ground giving a complete circut (honk Honk) green wire and yellow both Go to blinkers so we have one black wire going to spring on ts switch and the horn button going to ground if you have relay it gets slightl...

call me i f you need it shipped pdqautomovers 1-888-737-3211 8am-11pmest

ive seen this seat in green and also redmy 67 had the red version for a few weeks

bored 40 over

when they bore the block they need to replace with larger pistons these are marked .03.04.05

i beleave he has this posted in 4 sale

IM LOOKING INTO ALARMS FOR MINE WOULD HATE TO GET HER FINISH ONLY TO BE STOLEN BECAUSE YOU CAN OPEN DOOR WITH A COAT HANGER AND HOT WIRE IN LESS TIME THAN I COULD USE THE BATHROOM AT A GAS STATION MAYBEE I CAN FIND A AFTER MARKET LOJACK

I WOULD LOVE TO GET MY HANDS ON ONE BUT HERE IN NC THEY SELL 69S NOT RUNNING NEED LOT O WORK FOR $1000 I PAID A BOAT WITH OVER 2000 INVESTED IN IT FOR A 67 WITH A BAD MOTOR BAD PAINT (SOMEBODY USED LATEX) NO BRAKES AND SOMEONES ILL TRY THIS WIRING

lookin for gauges and crossmember tranny mount her in nc

found that a toggle switch on the dash was set for a kill switch after untaping wire harness and tracing wire back wards or sdrawkcab
murphys truck!!

already done wasnt that

starter relay???

well it was the week end so i figure lets get to the bottom of my wipers bought some parts from guys on this site but just couldnt make it all fit together so i rip out all my wiper linkage ang try to put it back so it works no that didnt work so i head here start searching all posts on wiper assemb...

was working fine pulled some lights on dash they were blown and now no power to ballast no power to msd no power to coil no pwer to dist uget my drift my hot while runing circitdead it will crank and briefly start and when u let the key go it dies
checked all fuses checked ign switch

still a work in progress had to swith to a dart accelerator assembly so i would have a cable linkage still working on wiring need cross member/ tranny mount and exhaust system maybee by the end of this month

pdqauto is short for pdq auto movers shipping ca to ks should cost around $.50 a mile it is safer and when you take away the stress and increase in gas cost well worth it an questions call me gary 888-737-3211 PDQAUTO Sweptline.ORG Member Posts: 30 Joined: Mon Feb 15, 2010 7:34 pm City: CLAYTON Stat...