Sweptline.ORG

I have located a factory service manual for my Warn hubs. They are not as complicated as I had imagined.

I am closing in on the completion of my '70 W-200 project. I have spent a lot of time and effort to get it right. My front hubs look like **** and I would like to get them cleaned up and looking good. Does anyone restore the Warn hubs to new original condition ? I think they are M-7's, not sure howe...

Hello Dan, That is the same set up I have in my '70 W-200. In my truck, the center position on the floor valve = the tank behind the seat + left and right positions = left and right saddle tanks. The switch on my dash is connected to the fuel gauge with the same positioning. Center position = center...

I have a pair of clean grill louvers - inserts for a '70 -'71 available, if needed.
Not cracked or broken just needing paint.
Thanks,
Woody

Thanks guys all for the help and advice on the 360 heads. My goal would be to get the 318 to breath/flow smoother and get a bit more torque. I am already running a modern/newer carb, high rise intake manifold, RV cam, headers and (I think) higher compression pistons. Any other suggestions ? It sound...

Okay, I'll bite, do the 360 heads have ;
Bigger valves ?
Bigger intake and or exhaust porting ?
Better combustion chamber flow ?
Thus making more power or in my case more bottom end tongue ?

The original 318 is still in my '70 W-200. I have heard that 360 heads will bolt up to the 318 block and will yield better performance.
Any truth in this ?
Thanks in advance,
Woody

I have a '70 W-200 and chased this topic in the past. As best as I can recall, (I'm doing this from memory) there are subtle differences between the Marker lights. Some have a bright silver, almost a chrome finish and others have a flat dull silver finish. Some have the lens held in be 2 surface mou...

I've got Hedman Headers on my truck. They have held up well over the years.

RobertGilliam wrote:0000 Steel wool lightly

+ WD-40

The 1969 - 1971 Power Wagon badges, from the factory, should be the same.

My '68 had a larger, different "font" located on the hood and from '72 on was totally different.

On my '70 W-200 the Power Wagon badge is above the Dodge emblem.

Swepty's W-300 ? does such an animal exist ? I always thought the W-300 was a step side box. What does the data-plate on the driver side door jamb show ?

Thank you for the photos showing the difference ......................

Does anyone know if they are the same or unique to each truck ?

Thanks in advance,

Woody

I'll take it Chris. PM sent .........................

I bought my '68 W-200 Camper Special w-383 in 1974 and my '70 W-200 in 1985 ..... Loved'm since 1970

I've got factory color codes and color chips for 1964 - 1971. The chart that I have doesn't show " Forest Service Green " as a color. Check on the firewall, drivers side, there could be a tag referencing the color code. I know the color, as I had an x-forest service 1972 D-200. It may be called "Tur...

JohnB, the M-7 doesn't have the taper, it is cylindrical front to back. I'm sure you have seen them.

BTW; I need a lesson on how to upload photos.

WOW on the truck or the $119,950.00 price tag ??