Sweptline.ORG

Ok, thanks guys. Somebody offered me a '65 four eye a couple of days ago and it appears to be legit. It is a shortbed truck with a big block and the correct bucket seats along with the hood stripes that are in the right position. There is a big block in place but it cannot be factory because it is r...

What engine options were available in the 1965 (four eye) CSS??
Were all CSS trucks longbed???

Does the A100 and D100 have the same axle length?

I love everything about this truck!! GREAT!!!!

I see the 4 speeds ranging from $300-$500 here. The 383's in this area are almost free no matter what condition. Unless it's nicely rebuilt with the paperwork or something? A seized but buildable 383 here is probably going to fetch $100+/-, HP may bring more to the right buyer as some would like th...

On my '66 utiline(8 lug suspension-) I'm looking to swap to a dual m/c. Will a '68 Master cylinder bolt on with no mods other than the addition of a p.valve or similar??

:I have a 4 bolt m/c, so I guess I would need the adapter?

My manual says 5.5 pints for my Dana 60. Is this including the limited slip additive?? Or do you put in the 5.5 pints and then add the limited slip additive???

You can buy the electronic ignition wiring harness from Mopar for less than $30, buy you a spark box, ballast resistor, and wire it up. Or you can cut the wiring harness from a '73 to about a 1980 or so Mopar from a yard and do the swap even cheaper. Easy to do! Getting rid of the points makes a wor...

I see the 4 speeds ranging from $300-$500 here. The 383's in this area are almost free no matter what condition. Unless it's nicely rebuilt with the paperwork or something? A seized but buildable 383 here is probably going to fetch $100+/-, HP may bring more to the right buyer as some would like the...

Is the rear cover identical??

I'm setting out for better stopping power on my front brakes...

Good question... I guess I am stuck with a 318...since I have no intrest in getting rid of my NP435 hydraulic clutch setup. I don't want the difficult task of locating a hydraulic clutch flywheel and bellhousing for a big block, which will be expensive once I do locate the items. Don't make a hydrau...

Anyone have a pic of the two to compare?

so is there anyway to upgrade/improve what I have if retaining a drum brake system??

On the 5 lug 1/2 ton models: can you switch the drums/backing plates from front/rear??

Would a '66 318 truck use an "11 clutch setup with the NP435 transmission?? Which model '66 do you have? A good source for clutch parts is: http://www.hrclutch.com I've bought several clutch set ups from them. John '66 Utiline shortbox with 318 poly originally. Now it's an LA318. It is the d100, bu...

Would a '66 318 truck use an "11 clutch setup with the NP435 transmission??

http://www.ultrawheel.com/images/rims/50_51_polished-500.jpg Looking at new tires and wheels for my 67 stepside. I'm gonna go with 275/60R 15 cooper cobras in back and 235/70R15 in front. Can't decide if I like these style wheels or not. The price is right at under $1000 with mount/balance/install....

your going to have variations on the weight depending on wheels, and what is in the bed, etc. and some of it will depend on your personel desire, if you want it to be a heavy truck you'll get it over 4000lbs if its close to the factory tires and your just courious to what it weighs it will come in ...

No steering mods required with lift??