Sweptline.ORG

Rotate the engine by hand using a breaker bar and socket on the vibration damper bolt, plugs out. If you don't fell the spot that hangs up, then its probably the starter. Get a good battery and try that first. You'll need one eventually anyway. If not, borrow one from your other vehicle. Remove the...

Direct drive, starter looks newer, running straight off a boost pack as battery was completely toast.
1967 fargo - 318 poly.

Just got the truck, was told it would run - which means nothing - plugs out, turning via fan. Starter turns it over no issue without plugs, with plugs seemed to struggle. The rod bearing sounds possible.

Engine turns over but seems to get hung up a bit. Wondering ideas of what to look for. Pulled plugs, turns over nice until it hits a spot and takes a bit extra to get passed this spot but does. Would a sticky valve or push rod do this?

I know its likely been asked, but looking for help with a wiring diagram for a 67 fargo d100. I have wires melts and disconnected everywhere and want to start over if I can.

Sorry for the delay. Had issues with the seller. Just starting the project. Here is delivery day..
D100 fargo 67

Thanks

Looking at parts for a 1967 fargo, canadian. So I am aware it has the poly 318, but looking at other parts. Is there any real differences between a 66 dodge and a 67 fargo? When looking for parts, if I use 67, it doesn't give me poly parts, so I have been using 66 in looking for parts. Thanks for an...

Is there a simple way to repair this spot? I have looked for some panels without much luck. I will be looking to make my own if all else fails.

Is this why most trucks have rust holes at the body line of the cabs by the hoods??

That helps. Thanks

Looking for information, I am wondering if the 318 in a canadian fargo is the same as a dodge? Some information said it might be different until the year later. Any help would be appreciated.