Search found 29 matches
- Thu Dec 02, 2021 10:28 am
- Forum: **GENERAL TECHNICAL HELP**
- Topic: Headers 1969 W200 318
- Replies: 6
- Views: 1623
Headers 1969 W200 318
Can anyone help me pick headers for my 69 W200, 318, I understand I will need short headers as the fit on the starter side is tight. I found these sum-g9045 Headers.jpg Anyone have experience with this send me comments and most of all: Thanks for the time Summit Link: https://www.summitracing.com/pa...
- Sat May 01, 2021 6:18 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 318 Cooling Water Pump connection relocation
- Replies: 3
- Views: 348
Re: 318 Cooling Water Pump connection relocation
I purchased a power steering pump and It mounts below the pump.
What do you think I will run into. I understand I must re-route the lower radiator hose. What else.
What do you think I will run into. I understand I must re-route the lower radiator hose. What else.
- Thu Apr 29, 2021 10:25 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 318 Fan Belt Pully
- Replies: 2
- Views: 261
318 Fan Belt Pully
I have a 1969 Dodge W200 with a 318 ci. Currently adding a hydraulic pump for power steering to the 318 block on the driver side. Currently, the pully is 6.125" in diameter. Its a Single belt pully mounted on the harmonic balancer. Looking for a new pully with the capacity for more belts. Can anyone...
- Thu Apr 29, 2021 10:18 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 318 Cooling Water Pump connection relocation
- Replies: 3
- Views: 348
318 Cooling Water Pump connection relocation
I have a 318 engine in a 1969 Dodge W200. The water pump is connected from the bottom of the radiator on the driver's side of the engine to the water pump. I need to mount a hydraulic pump on this side of the engine and the hose from the radiator to the water pump is in the way. My question: can I p...
- Wed Apr 28, 2021 11:44 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 318 Block question
- Replies: 4
- Views: 398
Re: 318 Block question
Everyone Thanks for the assistance.
When I was under the truck looking up at those holes I figured something was wrong. Thanks again.
When I was under the truck looking up at those holes I figured something was wrong. Thanks again.
- Tue Apr 27, 2021 3:42 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 318 Block question
- Replies: 4
- Views: 398
318 Block question
Not sure what the hole is in the bottom of the block on the deck where the Oil pan mounts.
Should I plug the hole? What is the plug part number?
See image attached
Should I plug the hole? What is the plug part number?
See image attached
- Tue May 16, 2017 1:11 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 69 Dodge W200 318 Transplant 340~440 engine. Help?
- Replies: 6
- Views: 958
Re: 69 Dodge W200 318 Transplant 340~440 engine. Help?
Thanks for the help.
- Tue May 16, 2017 1:11 pm
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 69 Dodge W200 318 Transplant 340~440 engine. Help?
- Replies: 6
- Views: 958
Re: 69 Dodge W200 318 Transplant 340~440 engine. Help?
Thanks for the assistance
- Thu May 04, 2017 6:41 am
- Forum: *ENGINE/DRIVELINE/FUEL SYSTEM HELP*
- Topic: 69 Dodge W200 318 Transplant 340~440 engine. Help?
- Replies: 6
- Views: 958
69 Dodge W200 318 Transplant 340~440 engine. Help?
Please send me comments: Currently my 69 W200 PW has a 318, 4 speed manual transmission, with 4WD Transfer case. 1.What engine choices do I have that will bolt up to my current setup ? ( I assume a 340 / 360 will work ? If so What mods should I be aware of ? 2. What mods should I be aware of if I co...
- Sun Apr 16, 2017 12:25 pm
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Brakes Locking up ! 1969 W200, Help.
- Replies: 12
- Views: 1480
Re: Brakes Locking up ! 1969 W200, Help.
OMG....This was it....the adjustment was loose as a goose and probably tighten up. I thru in the towel and purchased a new booster first. When I was taking the old one out I did take note of the adjustments As I installed the new booster the adjustment required a few turns; I assume this was the dif...
- Sun Apr 16, 2017 12:17 pm
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: 69 W200 Tail Lights and front Running Lights
- Replies: 7
- Views: 1521
Re: 69 W200 Tail Lights and front Running Lights
Bingo....got it fixed thanks
- Sat Feb 18, 2017 6:18 pm
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: 69 W200 Tail Lights and front Running Lights
- Replies: 7
- Views: 1521
Re: 69 W200 Tail Lights and front Running Lights
Moonshine in a past life maybe.
- Sat Feb 18, 2017 6:17 pm
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: 69 W200 Tail Lights and front Running Lights
- Replies: 7
- Views: 1521
Re: 69 W200 Tail Lights and front Running Lights
Thanks....for the comment
- Sat Feb 18, 2017 6:14 pm
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: 69 W200 Tail Lights and front Running Lights
- Replies: 7
- Views: 1521
Re: 69 W200 Tail Lights and front Running Lights
Thanks for the TIP...I will look at this and let you know if it works.Thanks again
- Fri Jan 27, 2017 8:03 pm
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: 69 W200 Switch Schematics
- Replies: 2
- Views: 846
69 W200 Switch Schematics
Can anyone send me schematic of how the: 1. Light Switch works. 2. Wiper Switch work. 3. Key Switch works. If not I will remove them and do my best with trial and error to build my own schematic of how they work but if its done this would save me time with my understanding of the wiring. The diagram...
- Fri Jan 27, 2017 7:59 pm
- Forum: *ELECTRICAL/GAUGES/LIGHTING HELP*
- Topic: 69 W200 Tail Lights and front Running Lights
- Replies: 7
- Views: 1521
69 W200 Tail Lights and front Running Lights
Kindly understand after I purchased the truck I found most of the lights and dash meters were not working correctly. I fixed the gas tank sender by adding the "5-vdc Regulator" circuit I found in the form too. I also removed all 3rd party jumpers and I cleaned up all termination points on the fire w...
- Sat Jan 14, 2017 7:47 am
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Brakes Locking up ! 1969 W200, Help.
- Replies: 12
- Views: 1480
Re: Brakes Locking up ! 1969 W200, Help.
Planning to remove the master so I will adjust this too.Hobcobble wrote:Adjust your push rod that is between the brake pedal and the
master cylinder piston. Back if off slightly to reduce its overall length.
John
Thanks
- Sat Jan 14, 2017 7:46 am
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Brakes Locking up ! 1969 W200, Help.
- Replies: 12
- Views: 1480
Re: Brakes Locking up ! 1969 W200, Help.
Thanks for the tip. I plan to remove the Master Cylinder so I will check this too.PwrWgnDrvr wrote:Somebody else had this problem recently and it was debris stuck in the orifice where the lines attach to the master.
- Fri Jan 13, 2017 4:30 pm
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Brakes Locking up ! 1969 W200, Help.
- Replies: 12
- Views: 1480
Re: Brakes Locking up ! 1969 W200, Help.
The "block" on the frame is not a proportioning valve. It is not a valve of any sort. It is a safety switch only. Its purpose is to sense a lack of pressure in either the front or rear circuits and then illuminating the light on the dash to indicate this failure. It does not affect, or control brak...
- Fri Jan 13, 2017 4:24 pm
- Forum: *SUSPENSION/BRAKES/STEERING/TIRES HELP*
- Topic: Brakes Locking up ! 1969 W200, Help.
- Replies: 12
- Views: 1480
Re: Brakes Locking up ! 1969 W200, Help.
The "block" on the frame is not a proportioning valve. It is not a valve of any sort. It is a safety switch only. Its purpose is to sense a lack of pressure in either the front or rear circuits and then illuminating the light on the dash to indicate this failure. It does not affect, or control brak...