Master Cylinder/Wheel Studs
Master Cylinder/Wheel Studs
Hello, Relatively new to the site, was wondering where to start looking for a master cylinder and right hand thread wheel studs for my '61 D-100. I would like to put a set of aluminum wheels I have on there to dress her up a little bit. There is a Napa, Auto Zone and Advance Auto Parts here in Dade City. Not sure if this stuff is still available over the counter anymore. Thanks in advance for any help.
- Jeffc
- Sweptline.ORG Pioneer
- Posts: 1954
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Vancouver, WA
- Contact:
Should not be a problem for the stores listed to find what you
need, but they may just have to crack open a book to
find them, if the kid behind the counter can't find what you
need, look for a older guy that will work with you. New masters are still being made and so are wheel
studs.
need, but they may just have to crack open a book to
find them, if the kid behind the counter can't find what you
need, look for a older guy that will work with you. New masters are still being made and so are wheel
studs.
http://imageevent.com/jeffc
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
- Jeffc
- Sweptline.ORG Pioneer
- Posts: 1954
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Vancouver, WA
- Contact:
Trey, you might want to know that I tried Autozone for new
drums, no luck~on back order for ever, NAPA too~not in book
for D100 (listings for a lot of bigger trucks and the A100,
but not the fronts on the D100 (2 1/4shoex11"))
Did find new front drums though a differant supply house
that does brake parts only though..........
drums, no luck~on back order for ever, NAPA too~not in book
for D100 (listings for a lot of bigger trucks and the A100,
but not the fronts on the D100 (2 1/4shoex11"))
Did find new front drums though a differant supply house
that does brake parts only though..........
http://imageevent.com/jeffc
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
- Jeffc
- Sweptline.ORG Pioneer
- Posts: 1954
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Vancouver, WA
- Contact:
Don't forget that the front hub/drum wheel studs are
swedged in place, you can get away without doing that
on the cars, but not on the trucks since the drum is
held to the back of the hub and then there are those pesky
rear drums on the early splined axles that will have to be
removed assuming you 8.75 rear axle is stock to
the truck.
swedged in place, you can get away without doing that
on the cars, but not on the trucks since the drum is
held to the back of the hub and then there are those pesky
rear drums on the early splined axles that will have to be
removed assuming you 8.75 rear axle is stock to
the truck.
http://imageevent.com/jeffc
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
Yes, It still has the tapered axle shafts in the back I have a puller that my dad used on his Savoy wagon, I replaced the rear on my Belvedere with an A body unit for tire clearance. What do you mean with the front being swedged? Are they press fit and then locked/wedged in place somehow? I do have access to a press from a couple of different sources. THanks again for the info.
- Jeffc
- Sweptline.ORG Pioneer
- Posts: 1954
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Vancouver, WA
- Contact:
Yes, the front studs are press fit with a small piece of metal in the hole,
since the drums fit to back side of the hub on the trucks and
held by the studs to the hub (unlike the cars
that had drums to the front side of the hub) there is no way to get around this, you can't just bang them in with a big hammer and expect them to
hold right, or install right.
Sounds like your set on the rears since the studs are in the drums on the
rear, there also press fit on the rear since there is a risk of drum damage
if installed with a hammer.
since the drums fit to back side of the hub on the trucks and
held by the studs to the hub (unlike the cars
that had drums to the front side of the hub) there is no way to get around this, you can't just bang them in with a big hammer and expect them to
hold right, or install right.
Sounds like your set on the rears since the studs are in the drums on the
rear, there also press fit on the rear since there is a risk of drum damage
if installed with a hammer.
http://imageevent.com/jeffc
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4sp od
68 P300 318 727 base Oasis 22' RV
71 for sale D200 318 auto parts truck could be fixed compleat $400
Old iron or no iron!
One size does NOT fit all!