Just bought a 1970 D-200 3/4 Ton pick-up. First time owning a Mopar truck. The front end sheet metal is trashed and I need a replacement front clip. What years will interchange and does anyone know of any parts trucks in the Seattle area? Had no luck so far at the wrecking yards. Thanks,
Tattooman
Front Clip Interchange
about any fender 61-71 D or W 100 or 200 will fit
BUT only 70-71 have the side marker lights
69-71 hood are the same
Don may have some parts or know where to look
he should be heading back to Federalway soon
BUT only 70-71 have the side marker lights
69-71 hood are the same
Don may have some parts or know where to look
he should be heading back to Federalway soon
ENJOY LIFE, --- It's the longest thing anyone ever does-- --
When seconds count, Help is only minutes away-----------------
When seconds count, Help is only minutes away-----------------
- MountainMoparRobin
- Founding Member
- Posts: 7854
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Lakewood
- State: CO
- Location: Lakewood Colorado
fenders
you can also buy them new!!!!!!!
I may be wrong, but I think that the core supports for the early '65's
and back had extra recesses for the 4 headlamp set up and different
mounting points/hardware for the grills. The '68 & earlier fenders will
work but if you're going to use '70 fender plaques, you'll more than
likely have to drill more holes to mount them. The '61 through '67 hoods
had the drop lip to follow the 4 headlamp and pie plate set ups. The '68
hoods were a one year hood with the straight lip but still kept the louvres
on the top. The '69-'71 hoods were the same but they had their own
hood latches.... you'd have to match up the appropriate year latches.
Hope some of this helps.
John
and back had extra recesses for the 4 headlamp set up and different
mounting points/hardware for the grills. The '68 & earlier fenders will
work but if you're going to use '70 fender plaques, you'll more than
likely have to drill more holes to mount them. The '61 through '67 hoods
had the drop lip to follow the 4 headlamp and pie plate set ups. The '68
hoods were a one year hood with the straight lip but still kept the louvres
on the top. The '69-'71 hoods were the same but they had their own
hood latches.... you'd have to match up the appropriate year latches.
Hope some of this helps.
John