1966-1968 big block hydraulic bellhousing on eBay
1966-1968 big block hydraulic bellhousing on eBay
Casting number: C-93961
This is NOT for sale by me, but I saw it on eBay and knowing the trouble I had getting one for my truck I thought I would post here:
https://www.ebay.com/itm/284565064036?_ ... 0168.m2941
I know this isn't the "for sale" area, but I wanted people to see it.
This is NOT for sale by me, but I saw it on eBay and knowing the trouble I had getting one for my truck I thought I would post here:
https://www.ebay.com/itm/284565064036?_ ... 0168.m2941
I know this isn't the "for sale" area, but I wanted people to see it.
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1818
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: 1966-1968 big block hydraulic bellhousing on eBay
No clutch pan.
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
Re: 1966-1968 big block hydraulic bellhousing on eBay
What is a clutch pan? The cover on bottom?
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1818
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: 1966-1968 big block hydraulic bellhousing on eBay
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
-
- Sweptline.ORG Member
- Posts: 495
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: 1966-1968 big block hydraulic bellhousing on eBay
The missing clutch pan is a small problem compared to the missing flywheel.
With 186 teeth that flywheel is specific to that bell housing.
With 186 teeth that flywheel is specific to that bell housing.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Re: 1966-1968 big block hydraulic bellhousing on eBay
I had a terrible time getting the hydraulic clutch pieces for my big block conversion. I eventually took the advice of a board member and stopped trying to piece all the bits from different sources - I paid a tiny premium to get the complete set of parts from one source. Considering how much time I was losing looking for individual pieces I don't regret it.
Now that I've bought all the pieces, I'm starting to see the occasional piece that I needed on the different auction sites. Just thought I'd point it out, I don't see many 'auctions' of heavy pieces like that bellhousing that sellers are willing to ship.
Now that I've bought all the pieces, I'm starting to see the occasional piece that I needed on the different auction sites. Just thought I'd point it out, I don't see many 'auctions' of heavy pieces like that bellhousing that sellers are willing to ship.
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3037
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: 1966-1968 big block hydraulic bellhousing on eBay
BigBlockTrucks wrote: ↑Tue Dec 28, 2021 1:58 pmThe missing clutch pan is a small problem compared to the missing flywheel.
With 186 teeth that flywheel is specific to that bell housing.
Don't really understand the issue. I converted a D500 from a 318 to a 400 BB. I had a pickup BB Hydraulic bell housing and used a re balanced 318 flywheel on the 400. I used the 318 clutch disc and pressure plate from the D 500 as it only had 26000 original miles on it.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
-
- Sweptline.ORG Pioneer
- Posts: 4124
- Joined: Fri Feb 15, 2008 8:46 pm
- City: Wichita Falls
- State: TX
- Location: wichita falls,texas
Re: 1966-1968 big block hydraulic bellhousing on eBay
What year was the D500?dodgeboykim wrote: ↑Fri Dec 31, 2021 3:03 pmDon't really understand the issue. I converted a D500 from a 318 to a 400 BB. I had a pickup BB Hydraulic bell housing and used a re balanced 318 flywheel on the 400. I used the 318 clutch disc and pressure plate from the D 500 as it only had 26000 original miles on it.
Yes with a pick-up bellhousing small block & big block flywheels are the same, as they are in 74-77 medium duty trucks.
Bucky
1966 W500
1975 W600
1978 W200 club cab
1975 W600
1978 W200 club cab
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3037
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: 1966-1968 big block hydraulic bellhousing on eBay
D500 is a 1970712edf wrote: ↑Fri Dec 31, 2021 3:43 pmWhat year was the D500?dodgeboykim wrote: ↑Fri Dec 31, 2021 3:03 pmDon't really understand the issue. I converted a D500 from a 318 to a 400 BB. I had a pickup BB Hydraulic bell housing and used a re balanced 318 flywheel on the 400. I used the 318 clutch disc and pressure plate from the D 500 as it only had 26000 original miles on it.
Yes with a pick-up bellhousing small block & big block flywheels are the same, as they are in 74-77 medium duty trucks.
Bucky
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
Re: 1966-1968 big block hydraulic bellhousing on eBay
Wow that green boom/crane truck is cool!!