Hello all,
I just came into an opportunity to buy a 67 D400 (I think 67, small back windows, pie plate grill, push button door handles) cheap that has an almost rust free cab (A little around each front cab mount) but soild rockers and steps, pretty much a virgin truck with a long flat bed on it. Sweet grill and no holes drilled into it like my 65 W100 i just bought. It has a slant 6 / NP435 / have no idea about the rear axle. Best part, its about 3 miles from the house.
Here is my question:
Will the 67 D400 cab bolt up to a 65 W100 without any mods?
Thanks
67 D400 cab compatibility question
- moparbay
- Sweptline.ORG Member
- Posts: 236
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Rapid City
- State: SD
- Location: Rapid City, SD
67 D400 cab compatibility question
moparbay
Ole "Blue" 68 D100 Adventurer
65 W100
67 D400
67 W100 (in pieces)
69 D100 converted to 4x4 (SOLD)
Ole "Blue" 68 D100 Adventurer
65 W100
67 D400
67 W100 (in pieces)
69 D100 converted to 4x4 (SOLD)
-
- Sweptline.ORG Pioneer
- Posts: 4037
- Joined: Fri Feb 15, 2008 8:46 pm
- City: Wichita Falls
- State: TX
- Location: wichita falls,texas
Re: 67 D400 cab compatibility question
I think the floor transmission hump is flatter, but I suppose it could be made to work.
Bucky
Bucky
1966 W500
1975 W600
1978 W200 club cab
1975 W600
1978 W200 club cab
- moparbay
- Sweptline.ORG Member
- Posts: 236
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Rapid City
- State: SD
- Location: Rapid City, SD
Re: 67 D400 cab compatibility question
Are you talking about the removable dog house or the part of the floor beyond the dog house? thanks
moparbay
Ole "Blue" 68 D100 Adventurer
65 W100
67 D400
67 W100 (in pieces)
69 D100 converted to 4x4 (SOLD)
Ole "Blue" 68 D100 Adventurer
65 W100
67 D400
67 W100 (in pieces)
69 D100 converted to 4x4 (SOLD)
- dodgeboykim
- Sweptline.ORG Pioneer
- Posts: 3013
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Chilliwack. B.C. Canada
- State: Foreign
- Location: chilliwack.
Re: 67 D400 cab compatibility question
moparbay wrote:Are you talking about the removable dog house or the part of the floor beyond the dog house? thanks
The floor opening is lower on the 300 series trucks and up. You can use the cabs but you will need to cut out part of the trans tunnel hump to install the 100/200 floor pieces. When you look at both floors it will become apparent what is different. And steering column hole through floor is in a different spot so you will have to address that area also.
Answer to your question is Yes you can make it work.
My truck is younger than me.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.
66 W100. 70 D 500 , 69 Hiab Speed Loader. 96 Ram 3500 Club Cab Cummin's 5 spd. 97 Ram 1500 Club Cab 5.9 gas auto. 83 W200 LB Propane 360 auto 09 Yammy Rhino 700.