gauges not working also
gauges not working also
Hello, I am having trouble with the fuel and temp gauges on my 65, have replaced fuel and temp sending units. followed threads and purchased a dc converter on amazon 12v to 5 v. installed The unit and now have a constant 5v. hooked wire to both sides of the fuel gauge and both work the same. have 5v to the temp gauge also but neither gauges register, grounded both gauges and they move to peg. grounded both wires at the sending unit and the gauges peg also. from what I understand the gauges are good. any help with what I missing? Thanks.
Re: gauges not working also
Look at this [again]:Randy wrote:Hello, I am having trouble with the fuel and temp gauges on my 65, have replaced fuel and temp sending units. followed threads and purchased a dc converter on amazon 12v to 5 v. installed The unit and now have a constant 5v. hooked wire to both sides of the fuel gauge and both work the same. have 5v to the temp gauge also but neither gauges register, grounded both gauges and they move to peg. grounded both wires at the sending unit and the gauges peg also. from what I understand the gauges are good. any help with what I missing? Thanks.
http://imageevent.com/jeffc/techstuff2e ... =4&s=0&z=2
John
Re: gauges not working also
Thanks for quick response, I didn't build the limiter I bought a voltage converter does the same thing I think 12v in 5v out tested and confirmed. but now no response from gauges.
-
- Sweptline.ORG Member
- Posts: 36
- Joined: Thu Nov 09, 2017 7:07 pm
- City: Gilroy
- State: CA
Re: gauges not working also
Did you get them working?