I see em listed as a set of four per vehicle? Does that mean there is one in the spindle, and one in the axle tube?
Anyone have experience replacing these?
If you have a part number for a decent USA made puller that works well that would be good too.
Thx! ;-)
NE1 R&R'd DANA 70 Spindle Bushings?
- crusty
- Sweptline.ORG Pioneer
- Posts: 809
- Joined: Sun Feb 24, 2008 6:35 am
- City: Yelm
- State: WA
- Location: Somewhere in
Re: NE1 R&R'd DANA 70 Spindle Bushings?
Is this front or rear? On my 70 rear, there was no bushings, just the normal tapered roller bearings. Maybe a picture to clarify what you are asking?
Re: NE1 R&R'd DANA 70 Spindle Bushings?
The bushings are in the DANA 70 Frt axle, same as the other post where I'm looking for hubs. There are 4 bushings, one in the spindle, and one in the axle tube, per side.
Thx.
Thx.
Re: NE1 R&R'd DANA 70 Spindle Bushings?
you could try napa or call Vintage Power Wagons. or ask over on the PW forums
Re: NE1 R&R'd DANA 70 Spindle Bushings?
Mopower, can you take a photo of what you are talking about? it might help some of these guys figure out what you are asking for
Re: NE1 R&R'd DANA 70 Spindle Bushings?
It's in here...Seff wrote:Mopower, can you take a photo of what you are talking about? it might help some of these guys figure out what you are asking for
No worries on the tech help, it doesn't look like there's anybody here who knows much (or anything) about working on/servicing the DANA 70 frt axle. I already figured this much out. And yes, Vintage Power Wagons (Thx Kaegi ;-{) online is super helpful.