Page 1 of 1
Where to find flywheel inspection cover for 66 w200 with 4 speed
Posted: Fri Oct 27, 2023 5:29 pm
by Derek939
Just curious if any of y'all may have the inspection cover for the 318 with np435 set up? Its the last real missing piece I kinda need before to much driving around.
Thanks,
Derek
Re: Where to find flywheel inspection cover for 66 w200 with 4 speed
Posted: Tue Oct 31, 2023 10:36 am
by Hobcobble
Re: Where to find flywheel inspection cover for 66 w200 with 4 speed
Posted: Fri Nov 03, 2023 6:51 am
by Derek939
Is there a secret to get a response through his website? Ive made alot of inquiries but never hear a thing back.
Thanks!
Re: Where to find flywheel inspection cover for 66 w200 with 4 speed
Posted: Fri Nov 03, 2023 10:50 am
by Hobcobble
Derek939 wrote: ↑Fri Nov 03, 2023 6:51 am
Is there a secret to get a response through his website? Ive made alot of inquiries but never hear a thing back.
Thanks!
Hmmm.....
I know of no secrets. I can't tell you why you're not getting a response.
John
Re: Where to find flywheel inspection cover for 66 w200 with 4 speed
Posted: Fri Nov 03, 2023 11:24 am
by PwrWgnDrvr
Re: Where to find flywheel inspection cover for 66 w200 with 4 speed
Posted: Sat Nov 04, 2023 9:31 am
by ozzie
I got one from the local pull, and pay yard. the one I got was from a 70's dodge pickup. I think any Mopar 318 will fit. $3.00 bucks back then, early 2000.
Re: Where to find flywheel inspection cover for 66 w200 with 4 speed
Posted: Mon Nov 06, 2023 3:43 pm
by Derek939
Its 100% my fault. They responded immediately. My email just marked them as junk
Thanks again all
Re: Where to find flywheel inspection cover for 66 w200 with 4 speed
Posted: Tue Nov 07, 2023 12:52 pm
by dodgeboykim
ozzie wrote: ↑Sat Nov 04, 2023 9:31 am
I got one from the local pull, and pay yard. the one I got was from a 70's dodge pickup. I think any Mopar 318 will fit. $3.00 bucks back then, early 2000.
68 And back Hydraulic Bell housing covers are very different than 69 and up.
And the Hydraulic BB Covers are different than the Hydraulic SB covers.