Headers 1969 W200 318

[cometphoton]

Can anyone help me pick headers for my 69 W200, 318, I understand I will need short headers as the fit on the starter side is tight.
I found these

Summit Headers

Anyone have experience with this send me comments and most of all: Thanks for the time

Summit Link:
https://www.summitracing.com/parts/sum- ... B#overview

[Series1Utiline]

Personally I wouldn't spend the money and effort for block hugger style headers as they just don't provide much of a performance increase. There must be several brands and applications of full-length headers that will fit in spite of the starter. As well, there are several starters available at reasonable cost that could create the space you need.

[Jim100]

Study on Hedman headers. I had a set of the long tube on a W truck and a D truck with normal starters and no real issue. Maybe they don't make them anymore.

[67step100]

Study on Hedman headers. I had a set of the long tube on a W truck and a D truck with normal starters and no real issue. Maybe they don't make them anymore.

Like these? https://www.hedman.com/truck-headers?cp ... 90&CID=318

[64D100Poly]

I got my long tubes from Stan's Headers in Washington, made to fit specifically for Swepty Polys with zero clearance issues, I don't know if he's still around but might be worth looking into.

[JJ]

Word to the wise, I've been waiting on ceramic coated headers from Headman since I believe Oct. 2021 for my D150. However Summits website shows the plain ones are in stock.

[Blizzard523kf]

Check out TTI headers, made for mopars