clutch diameter
-
- Sweptline.ORG Member
- Posts: 42
- Joined: Mon Nov 25, 2019 11:31 am
- City: Santa Barbara
- State: CA
clutch diameter
So, at some point before summer, its gonna get a new clutch & pressureplate, etc. And i see it can be either a 10 or 11 in clutch. two questions. can i tell what size it is w/o taking it apart? maybe the distance between two adjoining pressureplate bolt holes? Or some way short of pulling the trans to look? second question: nominal thickness of a new clutch disc? i like to have the parts in hand for something like this, minimize down time. thx.
Re: clutch diameter
Post the year, model, engine & transmission of your Sweptline.dynamutt wrote: ↑Mon Jan 13, 2020 1:01 pmSo, at some point before summer, its gonna get a new clutch & pressureplate, etc. And i see it can be either a 10 or 11 in clutch. two questions. can i tell what size it is w/o taking it apart? maybe the distance between two adjoining pressureplate bolt holes? Or some way short of pulling the trans to look? second question: nominal thickness of a new clutch disc? i like to have the parts in hand for something like this, minimize down time. thx.
www.hrclutch.com
John
- powerwagon54
- Sweptline.ORG Pioneer
- Posts: 1335
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Washougal
- State: WA
- Contact:
Re: clutch diameter
We stock the 10 spline clutches for 61-68 sweptline.
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: clutch diameter
Its a 69 A100, LA 318.
-
- Sweptline.ORG Member
- Posts: 42
- Joined: Mon Nov 25, 2019 11:31 am
- City: Santa Barbara
- State: CA
Re: clutch diameter
69 A100, basic three speed.... top cover. started out w/ a 3.91 rear.