Stromberg carburetor

Engine, transmission, rear-end, driveline, fuel system etc..
Post Reply
matthew
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 69
Joined: Sun Jan 24, 2010 8:02 pm
City: nova
State: OH

Stromberg carburetor

Post by matthew » Fri Jun 16, 2017 2:31 pm

Ok the problem I'm having is choke related.i have to really step on throttle to release it off of high idle.if I don't it is a bear to push choke cable in.it opens and closes fine.am I missing something here.do I need to lube can we're throttle idle screw rides on cam.was just curious if anyone else has had this issue.thanks.

Atmobil
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 234
Joined: Fri Oct 23, 2015 1:28 pm
City: Ler
State: Foreign
Location: Ler, Sø-Trøndelag, Norway

Re: Stromberg carburetor

Post by Atmobil » Thu Jul 13, 2017 10:52 am

I'm not really sure if this but maybe you can lubricate the linkage itself?
I'm currently rebuilding my carb (I have the Stromberg WW) and I'm thinking of lubing upp all the moving parts when I put it back togehter.
Gaute Halsaunet

PwrWgnDrvr
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 5206
Joined: Wed Dec 31, 1969 6:00 pm
Location: Walnut Creek, CA

Re: Stromberg carburetor

Post by PwrWgnDrvr » Thu Jul 13, 2017 2:24 pm

Try graphite on the cams.

Post Reply