Hi Guys
This may sound like a silly question.
I was just wondering if any of the old Dodges over there run split line brake master cyl. As all of the early dodges in Austrailia run single lines.
They stoped making the Dodge trucks over here in 78 so I cant even compare to newer models
And also I have noticed that none of you guys have bullbars, are they illegal over there?
The www at the bottom will link to pics of my truck.
Brakes & bullbars
I changed my '61 to a dual res. master cylinder. I
used a junction block from a '71W200 and flared &
ran my own lines. I have brush guards for a couple
of my trucks but I'm not sure if they'd qualify for
a "bull bar". The brush guards bolt to the top of the
bumper and are pinned to the frame by bar stock
rods that run through holes in the core support. A
lot of the military Sweptlines were outfitted with
brush guards.
John
used a junction block from a '71W200 and flared &
ran my own lines. I have brush guards for a couple
of my trucks but I'm not sure if they'd qualify for
a "bull bar". The brush guards bolt to the top of the
bumper and are pinned to the frame by bar stock
rods that run through holes in the core support. A
lot of the military Sweptlines were outfitted with
brush guards.
John