Does anyone know of a source for bed floor patch panels. Exline’s website says the ribs are different shape than original. I’m only looking for a couple square feet worth of patch.
The bed floor is beautiful except the holes that were torched out for water lines.
It had a 500 gallon tank in it for years being a brush truck.
Bed floor
-
- Sweptline.ORG Member
- Posts: 454
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Bed floor
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
-
- Sweptline.ORG Pioneer
- Posts: 7368
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Bed floor
powerwagon54 probably has a junk bed he can cut a piece out of. Other than than, find one in a junkyard.
-
- Sweptline.ORG Member
- Posts: 454
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: Bed floor
Hard pressed to find a bed in the yards around here. These trucks almost don’t exist in my area anymore.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
-
- Sweptline.ORG Pioneer
- Posts: 7368
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Bed floor
Don't limit your search to just your area.
Re: Bed floor
What dimensions do you need?
-
- Sweptline.ORG Member
- Posts: 454
- Joined: Fri Jan 01, 2021 11:46 pm
- City: Binghamton
- State: NY
Re: Bed floor
I did a little searching at a local car show. I found a truck a guy is parting out. If it doesn’t work out I will be in touch. I’m looking for a couple 12 by 24 inch patches that aren’t all dented up.
Late 65 w 200.
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
Factory LU-2 winch.
Updates: 205 transfer case,4.10 gears, disc brake Dana 60 front with lock out hubs
440 repower in the works
60 d100
383 with 727
4 wheel disc
3.73 geared rear
-
- Sweptline.ORG Member
- Posts: 33
- Joined: Wed Aug 25, 2021 4:49 pm
- City: Jacksonville
- State: AL
Re: Bed floor
I’m in the same boat. I am going to attempt to make a couple of patches.