Hello All,
I hate Generic parts! So when my wiper arms started to strip and fail I had to find a decent looking fix. The Anco replacement with the plastic disc looked odd. But I had a 41-03 wiper arm from the junk yard so I took it apart. Well the old Dodge arm piece with the bend fit right into the Anco part. And since it is adjustable I was able to get it just right. And it looks great. So here is how easy it was to upgrade.
That is all the website will allow. More to come.
Jimharold
Wiper Arm Upgrade
Re: Wiper Arm Upgrade
Here is the rest.
Super easy and took maybe 20 minutes. I hope this helps anyone in the same place I was. The Anco 41-03 may or may not have the adapter. Different reviews said "yes and no". Good luck.
Jimharold
Super easy and took maybe 20 minutes. I hope this helps anyone in the same place I was. The Anco 41-03 may or may not have the adapter. Different reviews said "yes and no". Good luck.
Jimharold
- Jims68
- Sweptline.ORG Pioneer
- Posts: 3126
- Joined: Wed Dec 31, 1969 6:00 pm
- City: Edgewater Park
- State: NJ
- Location: Southern New Jersey
- Contact:
Re: Wiper Arm Upgrade
Excellent write up!! nice job!
Re: Wiper Arm Upgrade
Great information. Thanks a million.
John
John
Re: Wiper Arm Upgrade
If only I could find the factory arms (with bolt on the end) that weren't $350!
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1769
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: Wiper Arm Upgrade
I'm bookmarking this one, thank you!
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org