Clutch n Brake Pivot Bushings.

Body, Trim, Interior, Dealer options, Paint e tc..
Post Reply
ScrooLoose
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 42
Joined: Tue Jul 16, 2019 8:24 am
City: Doylestown
State: OH

Clutch n Brake Pivot Bushings.

Post by ScrooLoose »

Hello All.
I have a couple of questions. I am pulling my clutch, brake pivot shaft. To clean up and lube to cut down on the squeaking. Before starting to pull it I searched the website to find hints and tips. Like always a good idea before I start a venture. I seen one post mention that the bushings are still available. Does anybody know where or part numbers? I cannot find them anywhere.
2nd. While searching for those parts I was on RockAuto and noticed they have interior sun visors for sweptlines. I am in need of and thought they were unavailable. They have them listed for 63 and newer. My truck is a 62 D100 Custom and I am 99 percent sure the 62 and 63 are the same cab. Can someone back me up on that before I order them.
Thanx.
SL.

User avatar
Wildergarten
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 1768
Joined: Wed Mar 21, 2018 5:27 pm
City: Los Gatos
State: CA
Contact:

Re: Clutch n Brake Pivot Bushings.

Post by Wildergarten »

ScrooLoose wrote:
Sun Dec 20, 2020 2:02 pm
Hello All.
I have a couple of questions. I am pulling my clutch, brake pivot shaft. To clean up and lube to cut down on the squeaking. Before starting to pull it I searched the website to find hints and tips. Like always a good idea before I start a venture. I seen one post mention that the bushings are still available. Does anybody know where or part numbers? I cannot find them anywhere.
2nd. While searching for those parts I was on RockAuto and noticed they have interior sun visors for sweptlines. I am in need of and thought they were unavailable. They have them listed for 63 and newer. My truck is a 62 D100 Custom and I am 99 percent sure the 62 and 63 are the same cab. Can someone back me up on that before I order them.
Thanx.
SL.
I think you can still get needle bearings for that pedal pivot shaft. Mine were Pedal bearing Torrington S-1212 or Koyo B-1212.
M
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org

User avatar
martincom
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 448
Joined: Thu Jul 30, 2020 10:04 am
City: Five Points
State: AL

Re: Clutch n Brake Pivot Bushings.

Post by martincom »

Are these what you are seeking the plastic bushings? If so, **NOT ALLOWED** has them. I would have posted the link, but forum remove the name and replaces with "Not allowed".
1*1971 D100 318 A/T
1*1970 Charger R/T 440-6PK A/T
2*1969 Daytona Charger 440 A/T
1*1969 Coronet R/T awaiting restoration
1*1969 Torino Talladega awaiting restoration

User avatar
martincom
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 448
Joined: Thu Jul 30, 2020 10:04 am
City: Five Points
State: AL

Re: Clutch n Brake Pivot Bushings.

Post by martincom »

**NOT ALLOWED**

I give up.
1*1971 D100 318 A/T
1*1970 Charger R/T 440-6PK A/T
2*1969 Daytona Charger 440 A/T
1*1969 Coronet R/T awaiting restoration
1*1969 Torino Talladega awaiting restoration

ScrooLoose
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 42
Joined: Tue Jul 16, 2019 8:24 am
City: Doylestown
State: OH

Re: Clutch n Brake Pivot Bushings.

Post by ScrooLoose »

Maybe you can give me a hint.
"Sounds Liiiiike"

PwrWgnDrvr
Sweptline.ORG Pioneer
Sweptline.ORG Pioneer
Posts: 7362
Joined: Wed Dec 31, 1969 6:00 pm
Location: Walnut Creek, CA

Re: Clutch n Brake Pivot Bushings.

Post by PwrWgnDrvr »

I see it posted just fine above.
Here's a hint.

You gotta take it easy.....
Down on the corner, out in the street, Willie and the poor boys...
My Grandma's favorite flower is the LiLaC bush.

ScrooLoose
Sweptline.ORG Member
Sweptline.ORG Member
Posts: 42
Joined: Tue Jul 16, 2019 8:24 am
City: Doylestown
State: OH

Re: Clutch n Brake Pivot Bushings.

Post by ScrooLoose »

Riddle Solved.
Thanx man.
SL.

Post Reply