Fender dogleg question

[fireguyfire]

I media blaster my genders from my 70 d100 and am replacing some rot in prep for repainting.
I am guessing the very bottom of the dog legs of the front fenders just roll under where the bracket joins, but I am wondering if someone could post of photo of this area of one of their fenders to confirm that before I fab up a repair panel.
The lower dog leg is more rotted on the other fender, and the bracket is missing so I can’t use that as a guide.

[PwrWgnDrvr]

I media blaster my genders from my 70 d100 and am replacing some rot in prep for repainting.
I am guessing the very bottom of the dog legs of the front fenders just roll under where the bracket joins, but I am wondering if someone could post of photo of this area of one of their fenders to confirm that before I fab up a repair panel.
The lower dog leg is more rotted on the other fender, and the bracket is missing so I can’t use that as a guide.

Did that hurt when you media blasted your genders?

[Wildergarten]

I media blasted my genders..

For a typo, that's prettty funny.

[Hobcobble]

I media blasted my genders..

For a typo, that's prettty funny.

That would certainly make a guy lie prostrate....

I wish I could help with a photo..... but I can't resize them.
The bottom of the fender does roll over that bracket though, as
you described.

John

[JLeather]

If these are the same as a '67 I have a front clip I can take pics of. It happens to be off and upside down already :)

[fireguyfire]

That would be great

[JLeather]

See photos:

[fireguyfire]

Thanks; perfect!

[JLeather]

One more pic so you can see how far that bracket should extend. I notice a good bit of yours is rotted off.