Just finishing the final details on my 70 d100 after a full restoration.
I had to replace both full floor pans and rockers during the restoration, and the replacement drivers side floor pan does not have the holes for the gas pedal located or drilled in it.
Could someone post up a photo to show exactly where the gas pedal is located, or better yet some measurements so that I can drill the 2 holes in the correct position and re install the gas pedal?
Gas pedal locating
-
- Sweptline.ORG Member
- Posts: 268
- Joined: Mon Aug 17, 2009 9:46 pm
- City: Cochrane
- State: Foreign
- Location: Western Canada
- ozzie
- Sweptline.ORG Member
- Posts: 435
- Joined: Wed Dec 31, 1969 6:00 pm
- City: colorado springs
- State: CO
- Location: colo. spgs. co.
Re: Gas pedal locating
the gas pedal on 70 pickup was not mounted on the floor, it was mounted on the fire wall above the floor.
ozzie
-
- Sweptline.ORG Member
- Posts: 268
- Joined: Mon Aug 17, 2009 9:46 pm
- City: Cochrane
- State: Foreign
- Location: Western Canada
Re: Gas pedal locating
Thanks; you are correct!