part identification
- quickgraffix
- Sweptline.ORG Member
- Posts: 45
- Joined: Wed Jul 01, 2020 6:35 pm
- City: stockton
- State: CA
part identification
hey everybody im looking for this part but i honestly don't know the actual name of this part
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: part identification
Its for 300 and up trucks. It wont bolt onto a 100/200 truck. It fits where the 100/200 bumper is and the frame protrudes too far forward to install the extension. The cab is raised above the frame on 300 and up trucks and this piece fills the space between the bottom of the core support and the top of the frame.
- quickgraffix
- Sweptline.ORG Member
- Posts: 45
- Joined: Wed Jul 01, 2020 6:35 pm
- City: stockton
- State: CA
Re: part identification
i saw one installed on a d100 it looked great i'm sure there was custom metal work done and i have a metal guy that owes me
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: part identification
Yes, it would mount where the bumper is. Light weight tin instead of a bumper is typical stupidity of people today.
Go find ANY sweptline 1 ton or larger in a junkyard and you can get that part from it - if its not bent up, which most are.
Go find ANY sweptline 1 ton or larger in a junkyard and you can get that part from it - if its not bent up, which most are.
- quickgraffix
- Sweptline.ORG Member
- Posts: 45
- Joined: Wed Jul 01, 2020 6:35 pm
- City: stockton
- State: CA
Re: part identification
regardless of what people think...you know who you are... im building a show truck so your opinion doesn't matter and i'm still looking for this part