Is this a different variation of an A100 rear bracket, or for a different truck entirely? Thanks!
Bumper Bracket ID
Bumper Bracket ID
Hi, I'm hoping someone can help identify a set of bumper brackets. The spacing of the holes that mount to the chassis are identical to rear brackets for an A100. But the A100 rear brackets that I'm familiar with are really long on one side; not the Y shape that these are.
Is this a different variation of an A100 rear bracket, or for a different truck entirely? Thanks!
Is this a different variation of an A100 rear bracket, or for a different truck entirely? Thanks!
-
PwrWgnDrvr
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Bumper Bracket ID
They look right for the light duty swept rear bumper, but the version for 61 - mid yr 65 is about 2" longer than the version for mid 65 - 68. The early beds hang further past the frame than the later beds.
Re: Bumper Bracket ID
Mystery solved. These ARE for an A100. Somebody cut the long end off.
Thanks for the assist.
Thanks for the assist.