Box floor bolts
- marklein
- Sweptline.ORG Member
- Posts: 607
- Joined: Sun Nov 11, 2012 9:55 am
- City: Red Deer
- State: Foreign
Box floor bolts
Can someone tell me how many bolts there are in a 76 inch utiline box floor?
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Box floor bolts
A lot!
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: Box floor bolts
Since u had to wait til it got dark to ask... flashlight says 54 in a 64 bed with 6 strips. My 66 9' bed has 7 strips (narrower boards) - interesting
- Wildergarten
- Sweptline.ORG Pioneer
- Posts: 1768
- Joined: Wed Mar 21, 2018 5:27 pm
- City: Los Gatos
- State: CA
- Contact:
Re: Box floor bolts
PwrWgnDrvr wrote: ↑Tue Oct 22, 2019 8:16 pmSince u had to wait til it got dark to ask... flashlight says 54 in a 64 bed with 6 strips. My 66 9' bed has 7 strips (narrower boards) - interesting
Narrower boards are cheaper. It's easier to get vertical grain from a smaller log.
'69 W200 (thumbnail)
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
'68 W200 (RIP)
'68 W200 383 NP435 3.53
'67 W200 383 NP435 4.10 w overload springs, Dana 60, PTO winch & flatbed dump, racks, crane, c-air (Max)
Mark Vande Pol
Wildergarten.org
- marklein
- Sweptline.ORG Member
- Posts: 607
- Joined: Sun Nov 11, 2012 9:55 am
- City: Red Deer
- State: Foreign
Re: Box floor bolts
Thanks guys, I plan on using button head stainless bolts, they're. 40 cents each and I don't want to get too many. I'm going to use plastic deck boards, there'll be no rot.
Re: Box floor bolts
I bought all my bed hardware from bolt depot in NY cheaper than hardware store in total.