Just getting my 70 D100 ready for a factory repaint.
My truck is a 4 speed manual with a rubber floor.
There is nothing in my truck to cover the edge of the rubber flooring where it meets the edge of the rocker close to the door, but poking around on the internet it appears there should be metal mouldings that cover the edge of the rubber floor there painted body colour; mine are gone I guess.
Are these mouldings available, or does someone have a spare set they would be willing to part with?
70 D100 floor trim mouldings
-
- Sweptline.ORG Member
- Posts: 268
- Joined: Mon Aug 17, 2009 9:46 pm
- City: Cochrane
- State: Foreign
- Location: Western Canada
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
Re: 70 D100 floor trim mouldings
Not mouldings. The original cab design has a flange integral to the step that was above the floorpan. That created a lip the rubber mat would fit under. Did you replace your floor pans and not maintain that lip?
-
- Sweptline.ORG Member
- Posts: 268
- Joined: Mon Aug 17, 2009 9:46 pm
- City: Cochrane
- State: Foreign
- Location: Western Canada
Re: 70 D100 floor trim mouldings
I guess I did,but my old (factory original) floor pans appeared to be the same way
- my5thmopar
- Sweptline.ORG Pioneer
- Posts: 1003
- Joined: Thu Aug 08, 2013 8:51 pm
- City: Columbia
- State: TN
Re: 70 D100 floor trim mouldings
I didn’t realize that either. There was only about 1/8+ and my rubber mat goes to the edges but it lays down ok. Craigfireguyfire wrote: ↑Thu Aug 08, 2019 10:33 pmI guess I did,but my old (factory original) floor pans appeared to be the same way
1964 D100 Utiline
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
- ozzie
- Sweptline.ORG Member
- Posts: 435
- Joined: Wed Dec 31, 1969 6:00 pm
- City: colorado springs
- State: CO
- Location: colo. spgs. co.
Re: 70 D100 floor trim mouldings
does anybody know where you can buy the rubber mat for our trucks? are they still available?
ozzie
-
- Sweptline.ORG Pioneer
- Posts: 7362
- Joined: Wed Dec 31, 1969 6:00 pm
- Location: Walnut Creek, CA
- my5thmopar
- Sweptline.ORG Pioneer
- Posts: 1003
- Joined: Thu Aug 08, 2013 8:51 pm
- City: Columbia
- State: TN
Re: 70 D100 floor trim mouldings
I bought an ACC but, it doesn't fit well.PwrWgnDrvr wrote: ↑Fri Aug 09, 2019 9:47 amNo one makes them and there aren't any exact replacements available.
There is some aftermarket stuff that claims to be for the swept, but its far from exact.
1964 D100 Utiline
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
2019 Ram Classic
viewtopic.php?f=34&t=36025&hilit=build
viewtopic.php?f=34&t=40251
- Red383
- Sweptline.ORG Member
- Posts: 344
- Joined: Tue Dec 18, 2012 7:45 am
- City: Fort Loramie
- State: OH
Re: 70 D100 floor trim mouldings
Exline reproduced the carpet trim in stainless or mild steel:
http://www.exlinecustomauto.com/custom-services.html
http://www.exlinecustomauto.com/custom-services.html
1965 Dodge D200, 318 4-speed converted to 4x4 with NV4500 trans
-
- Sweptline.ORG Member
- Posts: 268
- Joined: Mon Aug 17, 2009 9:46 pm
- City: Cochrane
- State: Foreign
- Location: Western Canada
Re: 70 D100 floor trim mouldings
Perfect!
Thanks
Thanks